1) mobile phase composition
流动相组成
1.
Optimization of mobile phase composition in PFLC for protein renaturation with simultaneous purification is thus much more important than that in usual liquid chro.
蛋白折叠液相色谱法(PFLC)用于变性蛋白质复性并同时纯化时对流动相组成及其洗脱条件的要求远较通常的液相色谱法高。
2) diphasic multicomponent flow
两相多组分流动
3) phase component
相组成
1.
The effects of electrolytical parameters on phase component and microstructure of titania films by MAO;
处理液参数对钛合金微弧氧化膜相组成和微结构的影响
2.
SEM and XRD were employed to characterize the growth kinetics,surface morphology and phase component of the coatings fabricated at different treatment frequencies.
利用自制多功能微弧氧化膜的制备系统对TC4钛合金进行表面处理,通过扫描电镜(SEM)和X射线衍射仪(XRD)研究脉冲频率(f)对氧化膜生长特性、表面形貌和相组成的影响。
3.
XRD and SEM were employed to characterize the phase component and surface morphology of the films.
利用XRD和SEM分别对氧化膜的相组成和表面形貌进行了分析。
4) phase constitution
相组成
1.
Study is made of the phase constitution of La2O3-H3BO3-C system during high-temperature sintering in argon atmosphere by means of XRD and TG-DTA.
采用TG-DTA和XRD等分析手段对La2O3-H3BO3-C体系高温烧结过程中的相组成进行了研究。
2.
The effects of positive and negative voltage on phase constitution of ceramic coating on aluminum alloy prepared by micro-arc oxidation were studied by XRD analysis.
通过XRD分析,研究了正向、负向电压对铝合金微弧氧化陶瓷层相组成的影响。
3.
SEM, TEM and X ray diffractometer are used to make analysis ofthe microstructure, micromorphology,hardness, residual stress and phase constitution of TiN coatings deposited by hollow cathode deposition, (HCD) and theireffects on the durability of TiN-coated HSS tools.
分别运用扫描电镜（ＳＥＭ）、透射电镜（ＴＥＭ）和Ｘ射线衍射仪研究了空心阴极法（ＨＣＤ）制备的ＴＩＮ涂层的组织结构、微观形貌、内应力和相组成及其对ＴｉＮ涂层高速钢刀具耐用度的影响。
5) phase composition
相组成
1.
Influence of substrate thermal conductivity on the phase composition of high velocity oxy-fuel sprayed Al-Cu-Cr quasicrystalline coatings;
基体热导率对超音速火焰喷涂Al-Cu-Cr准晶涂层相组成的影响
2.
Phase composition,mechanical properties and thermal shock resistance of (MgO)_(0.1-x)(CaO)_x(ZrO_2)_(0.9) ceramics;
(MgO)_(0.1-x)(CaO)_x(ZrO_2)_(0.9)陶瓷的相组成、力学与抗热震性能研究
3.
The phase composition and thermal stability of the LaNi_5-34wt%Mg alloy prepared by high energy ball milling;
高能球磨LaNi_5-34%(质量分数)Mg的相组成与热稳定性能
6) Phase composition
物相组成
1.
The phase composition and microscopic morphology were analyzed by optical microscope (OM),scanning electron microscope (SEM) and X-ray diffractometer (XRD) for the as-deposited,as-annealed or as-pressed samples,respectively.
采用电子束物理气相沉积(EB-PVD)技术,成功制备了尺寸为150mm×100mm的TiAl基合金薄板,并利用光学显微镜(OM)、扫描电子显微镜(SEM)和X射线衍射(XRD)等测试手段,对真空退火或热压前后试样的显微形貌、物相组成等进行了分析。
2.
The sintering characters and phase composition of BaO-CeO_2-TiO_2 were examined with TG- DTA,SEM,EDAX and XRD.
采用TG-DTA、SEM、EDAX、XRD等测试手段研究了BaO-CeO_2-TiO_2微波介质陶瓷的烧结特性及物相组成。
3.
The phase composition and fracture morphology of Ti-Al/Nb multilayer composites compared with those of one-layer Ti-Al alloys were analyzed by SEM etc.
2mm厚由24层Ti-Al和23层Nb交替叠加而成的Ti-Al/Nb层板复合材料,并采用扫描电子显微镜(SEM)等测试手段,对其物相组成和断口形貌等与Ti-Al单层材料进行了对比分析。
补充资料：流动相流速
分子式：
CAS号：
性质：在色谱柱出口的温度和压力下测得并校正到柱温时的流动相的体积流速，常用的单位是ml/min。
CAS号：
性质：在色谱柱出口的温度和压力下测得并校正到柱温时的流动相的体积流速，常用的单位是ml/min。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条