1) mother liquor holding tank
母液储罐
1.
Reasons and countermeasures for mother liquor holding tank wall thinning down of high density polyethylene device;
大庆高密度聚乙烯装置母液储罐罐壁减薄原因及措施
2) liquid ammonia tank
液氨储罐
1.
Taking the liquid ammonia tank of a company for an example,this paper analyses the hazard of the liquid ammonia tank,estimates the liquid ammonia tank by the model of explosion and poisoning,and puts forward the countermeasures.
以某公司液氨储罐为例,对液氨储罐区进行危险性分析,选用爆炸与中毒模型对液氨储罐进行安全评价,并提出安全对策措施,为企业制定应急救援预案和政府进行有效的监管提供科学依据。
2.
： In this article， the design of liquid ammonia tank working in low tem-perature was introduced
本文介绍低温液氨储罐保冷结构形式与设计。
3.
This paper analyzes the environmental risk about the liquid ammonia tank leakage in the synthetic ammonia plant according to the characteristics of the liquid ammonia.
根据液氨的特性,对合成氨厂液氨储罐区氨泄漏的环境风险进行了分析。
3) Alkali solution Storage Tank
碱液储罐
4) tank
[英][tæŋk] [美][tæŋk]
储液罐
1.
This paper presents a novel design of coolant tank testing system,where the pressure and flux is controlled by reducor valve and throttle.
提出一种汽车发动机冷却液储液罐试验系统的设计方案。
2.
The test results showed that the base of the raw material of the booster steering oil pump stock tank of Fukang car of Shenlong Co.
采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。
3.
High-density polyethylene (HDPE) is a new kind of engineering material This paper is concerned with the analysis of the strength and stiffness of HDPE welded tanks.
本文以一项具体工程课题为例，对高密度聚乙烯(HDPE）板材焊接储液罐进行强度和刚度分析，比较了解析法和有限元法的计算结果，具有较大的实际意义，可供类似工程应用参考。
5) oil tank
储液罐
1.
In order to simulate dynamic response of oil tank, a new added mass formula and finite element model is developed.
提出一种新的用于表述附加质量分布规律的公式和有限元单元模型,接入ABAQUS有限元软件对储液罐动力试验模型进行了数值模拟,分析对比了弹塑性屈曲“象足效应”和“钻石效应”的实验数据,证明所提出的附加质量公式是合理和有效的,并指出原经验公式在分析动水压力问题时的缺陷。
2.
In order to simulate dynamic response for oil tank, a new added mass formula and finite element model has been developed in this paper, which is implemented into ABAQUS as the user element subroutine.
本文提出一种新的用于表述附加质量分布规律的公式和有限元单元模型,接入ABAQUS有限元软件对储液罐动力试验模型进行了数值模拟,分析对比了弹塑性屈曲“象足效应”和“钻石效应”的实验数据,证明本文所提出的附加质量公式是合理和有效的,并指出原经验公式在分析动水压力问题时的缺陷。
补充资料：储罐无菌呼吸器
    |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条