1) PF resin
酚醛树脂(PF)
2) PF(Phenolic Formaldehyde Resin)
PF(酚醛树脂)
3) powdered phenol-formaldehyde resin adhesives
粉状酚醛树脂胶粘剂(P-PF)
4) phenolic resin
酚醛树脂
1.
Preparation of porous carbon foams using phenolic resin as precursor;
酚醛树脂为前驱体制备多孔碳泡沫材料
2.
Synthesis and characterize a new type highly-heat-resistant phenolic resin;
一种高耐热酚醛树脂的合成及表征
3.
Synthesis and properties of boron-and-silicon-containing phenolic resin;
硼硅双改性酚醛树脂的合成与性能
5) PF resin
酚醛树脂
1.
The development of wood PF resin adhesive;
木材工业用酚醛树脂胶粘剂的现状及研究进展
2.
Special PF Resin for Light-alloy Coated Sand;
轻合金覆膜砂专用酚醛树脂的开发研究
3.
Using pyrolytic tar from larch bark as partial substitute for phenol in proportions of 0%, 20%, 40%, 60% , four types of PF resins were prepared and applied in hot-pressing three- layer poplar plywood by orthogonal test methods with different levels of press pressure, press time, and and resin content.
以落叶松树皮热解油按比例0%、20%、40%、60%代替苯酚制备的4种酚醛树脂胶黏剂和人工林杨木单板为原料,采用正交实验设计方法,选择不同的热压压力、热压时间和涂胶量进行了3层胶合板压制试验。
6) phenol-formaldehyde resin
酚醛树脂
1.
Investigation on curing mechanism of phenylphenol modified phenol-formaldehyde resin by means of DSC method;
DSC对苯基苯酚改性酚醛树脂固化机理研究
2.
Preparation of water-soluble low hydroformylation phenol-formaldehyde resin;
一种低甲醛含量水溶性酚醛树脂的制备
3.
Preparation of phenol-formaldehyde resin/graphite bipolar plate conductive composite of high properties;
高性能酚醛树脂/石墨双极板导电复合材料的制备
补充资料：油溶性酚醛树脂
2402树脂是由对叔丁基苯酚与甲醛在碱性催化剂存在下缩聚而制得。淡黄色至棕色不规则透明块状固体,在出料前加入草酸还原，可制得浅色的树脂。分子量为500-1000。羟甲基含量7％-10％，酸值6．0 mg KOH／g，游离酚＜2．0％。
2402树脂油溶性好，耐热、耐老化。溶于苯、甲苯、环己烷、醋酸乙酯、溶剂汽油等有机溶剂和植物油．不溶于乙醇和水。
用作氯丁胶粘剂的增粘树脂，丁基橡胶的硫化剂。贮存于阴凉、通风的库房内，远离火种、热源。
2402树脂油溶性好，耐热、耐老化。溶于苯、甲苯、环己烷、醋酸乙酯、溶剂汽油等有机溶剂和植物油．不溶于乙醇和水。
用作氯丁胶粘剂的增粘树脂，丁基橡胶的硫化剂。贮存于阴凉、通风的库房内，远离火种、热源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条