说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高电导率
1)  high conductivity
高电导率
1.
The present status of Cu-based alloys with high strength and high conductivity is reviewed.
对高强度、高电导率铜基合金的研究现状进行了综述。
2)  High conductivity
高导电率
1.
<Abstrcat>The technology research of high conductivity Al-RE-B electrical pole are brief introduced.
简要介绍了含RE、B的高导电率电工圆铝杆的试验研究。
2.
In the present paper the main problem of developing highstrength and high conductivity materials was proposed.
指明了发展高强度高导电率材料过程中存在的主要问题,通过对喷雾共沉积工艺过程的特殊性和高导电材料的强化机制两方面较为详尽的分析,指出采用喷雾共沉积工艺可望制备出高强度高导电率的材料。
3)  high-conductivity electric conductive adhesive
高导电率导电胶
1.
Preparation of high-conductivity electric conductive adhesive for quartz crystal resonators;
石英晶体谐振器用高导电率导电胶粘剂的研制
4)  high temperature conductivity
高温电导率
1.
The static thermal corrosion rate in cryolite melt and the high temperature conductivity were measured.
以Fe2O3、NiO和Ag2O为主要原料,采用固相烧结工艺制备了NiFe2O4/Ag复合材料,用X射线衍射和扫描电子显微镜对材料的组成和微观结构进行了研究,并测量了样品在冰晶石熔盐中的静态热腐蚀速率及其高温电导率。
5)  high-temperature conductivity
高温电导率
1.
The reaction-sintering thermodynamic conditions in the synthesizing process of NiFe_2O_4 with NiO and Fe_2O_3 as main raw materials were investigated, and the bending strength and high-temperature conductivity of the synthesized spinel inert anode samples sintered secondarily on different conditions were measured.
研究以NiO和Fe2O3为主要原料合成镍铁尖晶石反应烧结过程中的热力学条件·同时对在不同烧结条件下合成的尖晶石二次烧结制备的阳极试样的抗弯强度及高温电导率进行了测量·结果表明:NiO和Fe2O3固相反应的热力学条件具备,反应先于致密化过程结束·当未经压制成型的粉料直接在合成温度为900℃下合成6h,经破碎工艺及二次烧结后,所制得的惰性阳极试样强度及电导率最大,烧结性能最好·而破碎工艺对增加粉末活性,提高试样电导率及力学性能也十分重要
6)  high-temperature electrical conductivity
高温电导率
1.
The high-temperature electrical conductivity,activated energy of electrical conductivity and thermal stability of Li_(1+x)V_3O_8 were measured.
运用TG/DSC,XRD,SEM等手段进行了表征,测量了Li1+xV3O8的高温电导率,求出了电导活化能;并研究了Li1+xV3O8的热稳定性。
补充资料:体积电导率
分子式:
CAS号:

性质:表征材料导电性的特征物理量,其值为体积电阻率的例数。体积电阻率(ρν)为试样体积电流方向的直流电场强度与该处电流密度之比,即式中U为外加电压,IV为体积电流,h为试样厚度,S为电极面积。体积电导率(σv)为:  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条