1) diffusion bonding
扩散接合
1.
In order to study the effect of diffusion bonding technology parameters on the joint strength of MoSi2 heating element cold-hot end,the technological papameters such as temperature,pressure,holding time and atmosphere were researched.
为了研究扩散接合工艺参数对二硅化钼发热元件冷热端的接合强度的影响,对接合端面状态、接合温度、保温时间、接合压力和接合气氛等工艺条件进行了对比分析,并根据接合部位的断裂强度和微观结构的研究结果,建立了在本实验条件下最佳发热元件冷热端扩散接合工艺条件:接合端面粗糙度为1。
2.
By using small unit of Vacuum diffusion bonding the diffusion bonding of copper and carbon steel 45(carbon 0.
利用自制小型真空扩散接合装置研究了铜与45钢的扩散接合,并对接合区的原子迁移行为及组织和硬度变化进行了分析。
3.
The experimental research on'diffusion bonding of spheroidal graphite cast iron and copper is conducted by adopting the self-made equipment of small vacuum diffusion bonding.
采用自制的小型真空扩散接合装置,进行了球铁与铜扩散接合试验研究。
2) compression-diffusion composite connection
压接-扩散复合连接
1.
Experimental study on compression-diffusion composite connection of Cu/Al joint
铜铝接头压接-扩散复合连接工艺及试验
3) diffusion bonding of Ti alloy/Cu alloy
钛合金/铜合金扩散连接
4) diffusion bonding
扩散连接
1.
Influence of gap on diffusion stress in expansion stress diffusion bonding;
装配间隙对膨胀压差法扩散连接压力的影响
2.
Fabrication of Magnesium/aluminum Laminated Composites by Diffusion Bonding and Its Interface Properties;
镁/铝层状复合材料的扩散连接制备及界面特性
3.
Research status of brazing and diffusion bonding of ceramic and metal;
陶瓷/金属钎焊与扩散连接的研究现状
5) diffusion bonding
扩散焊接
1.
Optimization and design of thickness of bearing steel layer diffusion bonding on titanium alloy surface;
钛合金表面扩散焊接轴承钢硬化层厚度的优化设计
2.
FEM analysis of quenching process for multi-layer diffusion bonding materials;
扩散焊接多层材料淬火过程的有限元分析
3.
Study on Diffusion Bonding Process of Metal Matrix Composites;
金属基复合材料的扩散焊接工艺研究
6) diffusion welding
扩散焊接
1.
Effect of electroless Cu-Mn coating on diffusion welding strength of Q235 material;
Cu-Mn化学镀层对Q235的扩散焊接强度的影响
2.
Preliminary study on hot isostatic pressing diffusion welding for China low activation martensitic(CLAM) steel;
中国低活化马氏体钢CLAM热等静压扩散焊接初步研究
3.
According to the welding process and feature of diffusion welding,the diffusion welding procedure of Ti6Al4V titanium alloy plate and 00Cr18Ni13 stainless steel net was detailedly investigated.
根据真空扩散焊接过程和特点,详细研究了TC4钛合金板与00Cr18Ni13不锈钢网的直接真空扩散焊接工艺。
补充资料：接合
接合
connex
单细胞生物有性生殖过程中的一种生殖形式(现象）。同一物种中属于不同接合型的细胞连接在一起，并交换遗传物质。在大肠杆菌中，DNA的转移是单向的；在草履虫则是相互的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条