说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 不锈钢板
1)  stainless steel plate
不锈钢板
1.
Discussion on the service life of rolling oil filter of cold mill for stainless steel plate;
不锈钢板冷轧机轧制油过滤器寿命探讨
2.
In this paper,the new welding procedure is introduced to weld plates with stainless steel plates instead of composite ones.
针对船舶钢结构工程修理中的复合板换新问题,文章提出以不锈钢板替代复合板进行焊接的焊接工艺,通过焊接工艺评定后进行现场焊接,焊接结果符合检验标准。
3.
Welding 3 mm thick stainless steel plate by using CO2 laser-TIG hybrid welding, the effects on welds width and penetration by welding parameters was studied based on multiple linear regression method.
采用CO2激光-TIG复合焊接3mm厚的不锈钢板,基于多元线性回归方法,研究了焊接工艺参数对焊缝熔宽及熔深的影响。
2)  stainless steel sheet
不锈钢板
1.
The influence of different laser-spot spaces on deformation results of SUS304 stainless steel sheet was studied,and simulated by Finited Element Soft-ABAQUS.
实验研究了不同的光斑间距对SUS304不锈钢板激光冲击的变形影响,并用ABAQUS软件进行了有限元仿真分析。
2.
The FEM simulation of spring-back of stainless steel sheet s cold-roll forming process is investigated using anisotropic yield functions(Hill,YLD 89),and comparing the results with the experiments data.
基于不锈钢板冷弯成型和回弹过程的数值模拟,研究了各向异性屈服准则Hill和YLD89对不锈钢板冷弯成型模拟的影响。
3)  stainless steel
不锈钢板
1.
This paper describes the method and processing parameters of laser welding of 8 mm thick stainless steel with high power Nd∶YAG CW laser.
探讨了采用高功率Nd∶YAG连续激光器焊接 8mm厚不锈钢板的工艺方法及工艺参数。
2.
This thesis to the wiredrawing stainless steel plate curtain wall application principle,main point of design and the construction control carried on a brife narration.
本文对拉丝不锈钢板幕墙的应用原理,设计要点和施工控制进行了简要叙述,拉丝不锈钢板幕墙做为一种新的装饰材料和工艺,较强的耐腐蚀和强度性能,将得到更广泛的应用和发展。
4)  stainless steel plate material
不锈钢板料
1.
In traditional process,1Cr18Ni9Ti stainless steel plate material needs to be drawn several times.
传统工艺中,1Cr18Ni9Ti不锈钢板料需多次拉深加工,其生产周期长、产品成本高、生产效率低。
5)  stainless steel platen
不锈钢压板
6)  stainless steel pipe board
不锈钢管板
1.
Corrosion proof overlaying welding for the 0Cr18Ni9 stainless steel pipe board;
0Cr18Ni9不锈钢管板的耐蚀堆焊
补充资料:不锈钢板
分子式:
分子量:
CAS号:

性质:按制法分热轧和冷轧的两种,包括厚度0.5-4毫米的薄板和4.5-35毫米的厚板。按钢种的组织特征分为5类:奥氏体型、奥氏体-铁素体型、铁素体型、马氏体型、沉淀硬化型。要求能承受草酸、硫酸-硫酸铁、硝酸、硝酸-氢氟酸、硫酸-硫酸铜、磷酸、甲酸、乙酸等各种酸的腐蚀,广泛用于化工、食品、医药、造纸、石油、原子能等工业,以及建筑、厨具、餐具 、车辆、家用电器各类零部件。为了保证各类不锈钢板的屈服强度、抗拉强度、伸长率和硬度等力学性能符合要求,钢板交货前必须经过退火、固溶处理、时效处理等热处理。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条