1) water lubrication
水润滑
1.
Investigation of the tribological characteristics of PEEK under water lubrication;
聚醚醚酮在水润滑下的摩擦磨损特性研究
2.
Tribological behavior of chromium oxide coatings under dry friction and water lubrication conditions
干摩擦及水润滑下氧化铬陶瓷薄膜的摩擦学性能
3.
The friction and wear behavior of three kinds of C/C composites(C/C) with different matrix carbon was tested with water lubrication using M2000 wear tester.
水润滑条件下,在M2000型摩擦试验机上测试了3种具有不同基体炭结构的C/C复合材料(C/C)的摩擦行为。
2) water lubricated
水润滑
1.
Analyses of the load capacity of water lubricated stern tube bearing;
水润滑艉轴承负载能力的分析
2.
The research progress of water lubricated bearings was introduced, including material , wear mechanism and application.
介绍了水润滑轴承材料、磨损机理的研究现状及应用。
3.
The research progress of water lubricated bearings was introduced,including material,lubricate and wear mechanism.
介绍了水润滑轴承材料、润滑机理及磨损机理的研究现状。
3) water-lubricated
水润滑
1.
Vibration and noise generation theory and experiment of water-lubricated rubber bearings
水润滑橡胶轴承摩擦行为及试验研究
2.
Modified phenol resin was bonded to glass fiber by wet winding,and water-lubricated bearing shell was prepared.
以腰果壳油、聚砜为改性剂对酚醛树脂进行增强改性,将改性后的酚醛树脂通过湿缠绕方法和玻璃纤维粘合,制成了水润滑轴承外壳,并研究了玻璃纤维含量对水润滑轴承外壳压缩强度的影响。
3.
Three-dimensional modal,stress distribution and harmonic response laws of water-lubricated bearings were studied using finite element software.
利用有限元软件研究了水润滑轴承的三维模态及其应力分布和谐响应规律。
4) water-lubrication
水润滑
1.
According to the low friction coefficient pairs under water-lubrication,which contain active pair and passive pair,their materials and performance were designed and studied in this paper.
主要针对水润滑条件下低摩擦系数摩擦副——包括主动副和从动配副的材料和性能进行设计研究。
5) water lubricating
水润滑
1.
The friction and wear behavior of wood fibre dipping resin coupled with stainless steel under water lubricating has been studied by using MM-200 friction wear test equipment.
利用ＭＭ－２００型摩擦磨损试验机，研究了木纤维素浸渍树脂在水润滑条件下与不锈钢对摩时的摩擦学特性，同时还利用扫描电子显微镜，对试样磨损表面进行了显微观察与分析。
6) Water-free lubrication
无水润滑
补充资料：极压润滑剂极压润滑
分子式：
CAS号：
性质： 具有防止滑动面破坏的各种润滑剂称为极压润滑剂。极压润滑剂一般都含有极压添加剂。极压齿轮油、极压润滑脂、切削油、轧钢油等都含有极压润滑剂。这种润滑剂用于处在重载(或高接触应力)、高速、高温下滑动摩擦表面的润滑称为极压润滑。极压润滑通常是通过极压添加剂与金属表面生成极压膜将两摩擦表面隔开，以降低摩擦系数、减缓磨损，达到润滑的目的。
CAS号：
性质： 具有防止滑动面破坏的各种润滑剂称为极压润滑剂。极压润滑剂一般都含有极压添加剂。极压齿轮油、极压润滑脂、切削油、轧钢油等都含有极压润滑剂。这种润滑剂用于处在重载(或高接触应力)、高速、高温下滑动摩擦表面的润滑称为极压润滑。极压润滑通常是通过极压添加剂与金属表面生成极压膜将两摩擦表面隔开，以降低摩擦系数、减缓磨损，达到润滑的目的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条