1) explosive cladding
爆炸复合
1.
Deformation behaviors in T2/QBe2 explosive cladding interface;
T2/QBe2爆炸复合界面结合层内的形变特征
2.
The determination of unsteady detonation area in explosive cladding;
爆炸复合中起爆区不定常段的确定
3.
The Mo/Cu bimetal clad rodding was produced with the explosive cladding technique.
本研究用爆炸复合方法制备出钼/铜(Mo/Cu)双金属复合棒,并利用金相显微镜(OM)、扫描电子显微镜(SEM)和能谱(EDS)、显微硬度、压剪分离等实验手段分析了复合界面的组织特征及力学性能。
2) explosive bonding
爆炸复合
1.
In order to meet the industrialized requirement, the explosive bonding for large and thick stainless steel with billet was experimentally investigated.
为了满足爆炸复合-轧制一体化技术的产业化要求,该文成功地进行了不锈钢/普碳钢大型厚板坯(复板厚20mm)的爆炸复合试验。
2.
Firstly, The Paper introduces explosive bonding principle ,then discusses movement process of explosive bonding simply, and finally analyses qualities of explosive bonding plate (elastic modulus, stress and density).
介绍了爆炸复合原理 ,对复合板运动进行了初步讨论 ,最后对复合板的特性 (密度 ,弹性模量和应力 )进行了分析。
3.
The roll cladding,explosive bonding and extruding-drawing bonding are three common processes for producing copper/aluminum clad materials currently.
轧制复合法、爆炸复合法、挤压拉拔法是生产铜铝复合材料的常用方法。
3) explosive welding
爆炸复合
1.
The electron microstucture of the interface of explosive welding of Titaniun(Ti)and A_3steel have been studied by means of scanning electron microscope(SEM),electron probe mi-croanalysis(EPMA)and transmission electron microscope(TEM).
采用扫描电镜,透射电镜和电子探针研究了钛与A_3钢爆炸复合界面层的电子显微组织。
2.
In the research of explosive welding between tubes, it is necessary to evaluate quantitatively the parameters of the moving tube.
在圆管与圆管的爆炸复合研究中,需要对管的动态参数做定量的估计。
3.
The microstructure redistribution of composition and formation of compoundat the interfaces of explosive welding Ti/Cu/1Cr 18Ni9Ti plates were investigatedand analyzed with the use of Scanning Electron Microscope(SEM) and ElectronPribe Microanalysis (EPMA).
S)爆炸复合界面层的电子显微组织特征,分析了界面层成分再分布规律及化合物的形成。
4) compound explosion
复合爆炸
1.
Research on Methane-Coal Dust Compound Explosion Intensity in Enclosed Vessels;
密闭空间甲烷—煤尘复合爆炸强度研究
2.
An experimental system including pressure transducer,data acquisition card,computer and electric spark ignition device was set up to experimentally study methane-coal dust compound explosions in confined vessels.
建立了由压力变送器、数据采集卡、计算机和电极点火装置组成的密闭空间甲烷-煤尘复合爆炸实验系统,动态响应时间小于1 ms,测试精度为0。
5) explosive compound welding
爆炸复合焊
1.
The study on the application for explosive compound welding technique has been preceded.
进行了爆炸复合焊技术应用的研究工作。
6) explosive clad plate
爆炸复合板
1.
In this paper, the states of the welding interface of explosive clad plate and the effects of the inteface wave on the welding interface of explosive-roll clad plate in large-scale drawing process are discussed and a method to avoid such effects occurred is also given.
该文论述了爆炸复合板的复层与基层结合界面的状态，以及对爆炸──轧制不锈钢复合板在深拉伸成型过程中产生的影响，并提出了解决方法。
补充资料：核爆炸地震波探测(见核爆炸探测)
核爆炸地震波探测(见核爆炸探测)
nuclear explosion seismic detection
hebaozho dizhenbo tanee核爆炸地震波探测(nuclear explos，onseismie detecuon)见核爆炸探汉，l。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条