1) spray
[英][spreɪ] [美][spre]
喷涂
1.
Simulation of the velocity distribution in the spray cone based on the two-phase flow model;
双流体模型模拟喷涂飞行区内的速度分布
2.
The principle and practice of spray polyurea elastomer technology;
喷涂聚脲弹性体技术的理论与实践
3.
RP Based Spray Forming for Ceramic Mould;
基于快速原形的陶瓷型喷涂法造型工艺研究
2) spraying
[英][sprei] [美][spre]
喷涂
1.
Selection of spraying material for air flow distribution board of agglomerated electrical dust catcher;
烧结电除尘器气流分布板表面喷涂材料的选择
2.
Study on supercritical CO_2(SC-CO_2)spraying of nanocomposite Ag,Ce/TiO_2 light-catalyzed self-cleaning coatings;
复合纳米Ag,Ce/TiO_2光催化自洁涂料的超临界CO_2喷涂研究
3.
Medium-pressure mixture gas spraying technology of water-borne wood coatings;
水性木器涂料的中压混气喷涂工艺
3) spray coating
喷涂
1.
The principle and technical requirement of spray coating (welding) is introduced.
介绍了喷涂(焊)的原理和技术要求,采用先喷后熔的喷焊方法,把硬质合金或金属合金粉末牢固的喷焊在需要修复的水箱拉丝机卷筒和塔轮上,使磨损件再次利用,降低了生产成本。
2.
The spray coating is a new technology for fiber mechanical construction.
耐火纤维喷涂是纤维机械化施工的一种新工艺。
4) spray painting
喷涂
1.
Acid-etched degreasing process for aluminum alloy profile before spray painting;
铝合金型材喷涂前的酸蚀脱脂工艺
2.
Based on the analyses of robot wrist structure and the requirements of spray painting for car,the conceptual design of a hollow oblique axis non-spherical 3R wrist is put forward.
针对机器人手腕结构类型和轿车喷涂作业要求,提出一种中空结构的斜交非球型3R手腕的概念设计。
3.
The characteristic and application situation of in-mold decorating,in-mold labeling,spray painting,hydrographics transfer printing,printing,electroplating and so on were analyzed detailedly.
介绍手机表面的主要装饰技术,对模内装饰、模内标签、喷涂、水转印、印刷和电镀等表面装饰技术的特点及应用场合等进行了详细的分析。
5) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
喷涂
1.
Through making up careful plan,changing top equipment of 128m3 blast furnace,coating inner wall of blast furnace,repairing external water cyclical system of blast furnace,straightening steel framework of top equipment are done at the same timeThis method can increase working efficiency and can save of cost for heavy repair of blast furnac
通过制定周密的计划，在１２８ｍ３高炉炉顶设备更换的同时，进行炉内喷涂、炉外水循环系统修复、炉顶钢架矫正等项修。
2.
The results of the experiment show that the AF powder can satisfy the coating of outdoor air-conditioner shell,and also have the obvious advantages of low cost and high quality.
介绍了超均膜粉末的技术特点、涂层性能及实际应用,实践证明超均膜粉末能够满足空调室外机壳的喷涂使用要求,并且具有使用成本低、喷涂质量好的明显优点。
3.
On the basis of producing compound fertilizer using a rotary drum for coating and granulation,the process technology of urea melt coating is added to make up nitrogen nutrition.
在转鼓喷浆涂布造粒制复合肥的基础上,增加尿素熔融喷涂补充氮养分的工艺技术。
6) sprays to draw the layer
喷涂涂层
1.
Analyzed the coal gas drum breeze machine a measure for hanging ashen reason, passing by experimenting finding out understanding definitely, then pass a leafs round sprays to draw the layer, realizes to prevent the ashen to pile up on leafs round.
分析了煤气鼓风机叶轮挂灰的原因,经过试验找到了解决的措施,即通过叶轮喷涂涂层,实现了防止粉尘在叶轮上的堆积。
补充资料：喷涂
分子式：
CAS号：
性质：涂料通过喷枪或碟式雾化器，借助于压力或离心力，分散成均匀而微细的雾滴，施涂于被涂物表面的涂装方法。可分为空气喷涂、无空气喷涂、静电喷涂以及上述基本喷涂形式的各种派生的方式，如大流量低压力雾化喷涂、热喷涂、自动喷涂、多组喷涂等。喷涂中的主要问题是高度分散的漆雾和挥发出来的溶剂，既污染环境，不利于人体健康，又浪费涂料，造成经济损失。大流量低压力雾化喷涂是低的雾化气压和低空气射流速度，低的雾化涂料运行速度改善了涂料从被涂物表面反弹出来的情况。使上漆率从普通空气喷涂的30%～40%，提高到了65%～85%。在轻革涂饰中用喷枪或喷浆机将涂饰喷于革面上。
CAS号：
性质：涂料通过喷枪或碟式雾化器，借助于压力或离心力，分散成均匀而微细的雾滴，施涂于被涂物表面的涂装方法。可分为空气喷涂、无空气喷涂、静电喷涂以及上述基本喷涂形式的各种派生的方式，如大流量低压力雾化喷涂、热喷涂、自动喷涂、多组喷涂等。喷涂中的主要问题是高度分散的漆雾和挥发出来的溶剂，既污染环境，不利于人体健康，又浪费涂料，造成经济损失。大流量低压力雾化喷涂是低的雾化气压和低空气射流速度，低的雾化涂料运行速度改善了涂料从被涂物表面反弹出来的情况。使上漆率从普通空气喷涂的30%～40%，提高到了65%～85%。在轻革涂饰中用喷枪或喷浆机将涂饰喷于革面上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条