1) rotating packed bed
旋转床
1.
Comparative study of characteristics of consumed power and pressure drop of different kinds of packing in a rotating packed bed;
不同填料旋转床功耗与气体压降特性对比研究
2.
Mass transfer characteristics of packing in a rotating packed bed;
旋转床内填料表面传质特性的研究
3.
The power consumption of rotating packed bed with wire packing in AIP system;
AIP系统丝网填料旋转床功耗研究
2) rotating bed
旋转床
1.
The basic theory and application research progress on distillation for rotating bed are introduced and the distillation research status is clarified.
论述了国内外旋转床精馏性能基础及应用研究进展;阐述了旋转床精馏研究现状;提出了旋转床精馏工业化中存在的不足与改进措施;分析了旋转床精馏的发展前景。
3) Rotating packed beds
旋转床
1.
In this dissertation, the fluid flow and mass transfer inside rotating packed beds were further investigated through experiments and computer simulating calculation on the basis of studies done by previous researchers in our center.
旋转床(又称超重机)是八十年代初发展起来的一种强化传质与反应的、新型的、高效化工分离设备,工业上有着极为广阔的发展前景。
4) rotating packed bed
旋转填料床
1.
Research on treatment of ammonia in phosphate tail gas by rotating packed bed;
旋转填料床净化磷肥尾气中的氨气
2.
Experimental studies on ozone oxidative treatment of dye wastewater in a rotating packed bed;
旋转填料床中臭氧化处理染料废水的试验
3.
Experimental study on capacity of gas hydrate in a rotating packed bed;
超重力旋转填料床中天然气水合物含气量研究
5) Rotating packed bed (RPB)
旋转填充床
1.
Modified aluminum hydroxid was prepared by carbonation of sodium aluminate in Rotating Packed Bed (RPB) coupled with hydrolysis.
利用旋转填充床碳分-水热耦合法制备改性氢氧化铝。
2.
Sulfur dioxide gad was absorbed when sodium hydroxide wan used absorption liquid in a rotating packed bed (RPB).
本文分析了目前脱硫烟气脱硫现状和存在的问题,特别指出了双碱法用于塔板等脱硫设备存在脱硫率低,装置占地面积大等缺点,从而提出了将双碱法用于旋转填充床的脱硫方法。
6) rotating packed bed
旋转填充床
1.
The production of light magnesium carbonate by one-time carbonation with rotating packed bed;
旋转填充床一次碳化法制备轻质碳酸镁
2.
Mathematical model for calculating micro-mixing chemical reaction in rotating packed bed;
旋转填充床内微观混合化学反应计算数学模型
3.
Simulation of flue gas desulfurization by rotating packed bed filled with holed disk packing and gas resistance in the process;
碟片填料旋转填充床模拟烟气脱硫及气阻
补充资料:XLB型旋转流化床制丸(粒)包衣机
[工作原理]
粉末或者母粒在旋转流化床内,受到环隙空气浮力、旋转离心力、自身重力作用,呈环周绳股状,粘合剂或包衣液喷入料层形成真球度极高的丸粒或连续均匀的衣膜。
[特 点]
转子速度连续可控。
粒丸在床内处于泛丸状态,使其表面致密,真球度极高。
适用于粉末微粒、微粒包衣、制丸、包衣。
[原理图]
[外形尺寸图]
[技术参数]
1.5 | 10 | 20 | 30 | 60 | 120 | |||
工作容积 | L | 5 | 30 | 60 | 105 | 180 | 420 | |
投料量 | kg/批 | 1.5 | 10 | 20 | 30 | 60 | 120 | |
旋转功率 | Kw | 0.55 | 1.5 | 4 | 5.5 | 7.5 | 11 | |
风机功率 | Kw | 4 | 5.5 | 7.5 | 15 | 18.5 | 22 | |
蒸汽耗量 | Kg/h | 35 | 42 | 84 | 166 | 250 | 332 | |
压缩空气量 | m3/min | 0.3 | 0.6 | 0.6 | 0.9 | 0.9 | 1.1 | |
安装尺寸参考 | A | mm | 2175 | 2250 | 2400 | 2550 | 2850 | 3300 |
B | mm | 905 | 1040 | 1240 | 1540 | 1960 | 2280 | |
C | mm | 1200 | 1350 | 1800 | 2050 | 2550 | 3200 | |
D | mm | 920 | 970 | 1130 | 1130 | 1180 | 1380 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条