1) storage battery shell and cover
蓄电池壳盖
1.
Block copolymerization polypropylene (PP1340) was chosed to produce storage battery shell and cover by injection molding through product designing, mould designing, forming techniques etc.
采用国内批量生产的嵌段共聚聚丙烯(PP1340),通过制品设计、模具设计和工艺设计,采用注射成型工艺研制出PP蓄电池壳盖。
2) shell and cover of alkaline storage battery
碱性蓄电池壳盖
1.
The effects of materials,forming tech- niques,design of injection-molded products,design of the mould are fully analyzed according to the thermoplas- tics such as E/P,ABS,PA,AS,MBS which are used for producing shell and cover of alkaline storage battery.
介绍了塑料冲击强度的概念,并针对碱性蓄电池壳盖所用的几种热塑性塑料如(乙烯-丙烯)共聚物、(丙烯腈-丁二烯-苯乙烯)共聚物、尼龙、(丙烯腈-苯乙烯)共聚物、(甲基丙烯酸甲酯-丁二烯-苯乙烯)共聚物具体分析了材料、成型工艺、制品设计、模具设计对冲击强度产生的影响,给出了提高冲击强度的方法。
2.
The effects of materials, forming techniques, design of the mould are fully analyzed according to the thermoplastics such as E P, ABS, PA, AS and MBS which are used for producing shell and cover of alkaline storage battery.
讨论注塑制品内应力的分类及产生机理,并针对碱性蓄电池壳盖所用的几种热塑性塑料如(乙烯/丙烯)共聚物、(丙烯腈/丁二烯/苯乙烯)共聚物、尼龙、(丙烯腈/苯乙烯)共聚物、(甲基丙烯酸酯/丁二烯/苯乙烯)共聚物具体分析了材料、成型工艺、模具设计对制品内应力的影响,给出了减小内应力的控制方法,提出了制品内应力的检验及消除方法。
4) storage battery shell
蓄电池壳
1.
The technological parameter for typical alkaline storage battery shell made from MBS was introduced,and the defects,reasons and solving methods of MBS battery shell were discussed.
从工艺特性、模具设计、制品设计等方面探讨了(甲基丙烯酸甲酯/丁二烯/苯乙烯)共聚物(MBS)制品的注射成型技术,结合典型MBS碱性蓄电池壳介绍了注射成型中的各种工艺参数,并对MBS蓄电池壳加工中的缺陷、原因及解决方法进行了论述。
5) battery cover
蓄电池盖板
6) battery box cover
蓄电池箱盖
补充资料：蓄电池
| 蓄电池 storage battery 放电后可充电再用的化学电源。又称二次电池。放电时它是自发电池，充电时它是电解电池。蓄电池中活性物质耗尽后，用外接直流电源充电使活性物质再生，可以反复多次循环使用，高达百次甚至几千次。常用电池容量（电池输出电量）、电池能量密度（电池输出电能与电池质量或体积比值）等参数描述其性能。蓄电池类型较多（见表），其中铅酸、碱性铁镍蓄电池应用较广。随着科学的发展及特殊性能的要求，促进各种新型蓄电池的研究。
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条