1) Emulsified Oil
乳化油
1.
The Productive Technology of Metal-Cutting Emulsified Oil;
金属切削乳化油生产工艺研究
2.
The feasibility analysis of modification of oil-fired boiler to burn emulsified oil;
燃油锅炉改烧乳化油的可行性分析
3.
The study on the stability of the emulsified oil wastewater
乳化油废水的稳定性研究
2) emulsified fuel
乳化油
1.
Experiment on Saving Fuel Consumption of Emulsified Fuel in Diesel Engines;
柴油机燃用乳化油时提高节油率的试验研究
2.
The Application of Emulsified Fuel to 1135 Diesel Engine;
乳化油在1135柴油机上的应用
3.
So catalytic combustion of emulsified fuel can be applied to a directinjection diesel engine practically.
将壁面催化重整燃烧技术引入乳化油的燃烧中,少量氢的产生能有效克服乳化油着火延迟及功率有所下降的难题,从而能够在直喷式柴油机中得以实际应用。
3) emulsifying oil
乳化油
1.
Preparation of Stone Processing Emulsifying Oil;
石材加工用乳化油的研制
2.
The temperature-viscosit of the emulsifying oil of different oil/water ratios was investigated.
以大庆采油六厂原油为研究对象,考察了不同油水组成乳化油的粘温关系;对低温破乳剂FP330的破乳效果进行了评价,结果表明:40℃时,加入破乳剂的量占乳化油的体积比为80μg。
3.
According to the working conditions of the cutting lubricating coolant used in stone processing,through the evaluations on the base oil, emulsifier and anti-wear agent,a specialized emulsifying oil for stone processing coolant is developed by making use of the resources of naphthenic thick crude from Karamay.
根据石材加工使用的切削润滑冷却液工作要求,利用克拉玛依独特的环烷基稠油资源,通过对基础油、乳化剂、抗磨剂等评选,开发研制出专用石材加工冷却液乳化油,并自行制定相应的产品技术指标。
4) emulsion oil
乳化油
1.
The suspended particle and emulsion oil specifications are very important for water quality control during produced-water re-injection in sandstone reservoirs.
注入水中乳化油含量和悬浮颗粒含量及粒径一直是控制砂岩油藏注入水水质的重要指标。
2.
The emulsion oil for cold-rolled steel sheet possesses good lubricity,good cooling characteristic,good antirust property and good annealing detergent performance,and it is showed which can satisfy the technological requirements of cold-rolled steel sheet by practical application.
钢板冷轧乳化油具有较好的润滑性能、冷却性能、防锈性能和退火清净性能,实际应用表明完全满足钢板冷轧的工艺要求。
5) emulsification oil
乳化油
1.
In order to understand the relationship between discharge and EDM process,impressed air,emulsification oil mirage,water mirage are adopted in this experimental.
用电火花方法修整金属基金刚石砂轮时,不同的放电介质对修整过程有不同的影响,考虑到电火花在线修整金刚石砂轮对加工介质的特殊要求,文章比较和研究了压缩空气、水雾气、雾状乳化油3种放电介质对修整过程的影响。
6) emulsifiable solution
乳油;乳化液
补充资料：乳化油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条