1) filling
[英]['fɪlɪŋ] [美]['fɪlɪŋ]
装填
1.
Improvements on the filling of ion exchange resin;
离子交换树脂装填方法改进
2.
The process to replace the catalyst of shifting furnace was introduced for large-sized ammonia synthesis plant;the requirements of type selection and filling method for catalyst were discussed.
介绍了大型合成氨厂低变炉更换催化剂的过程;论述了催化剂的选型要求和装填方法;阐明了催化剂还原过程中从还原前升温到还原初期、主期及末期的操作步骤和要求。
3.
Author has summarized the application situation of A203 type low temperature catalyst in 800 ammonia converter system,introduced the features and filling method of this catalyst;discussed the heating-reducing schemes and operating gists;through the comparison of production operation data,evaluation was made for application effect of A203 type ammonia synthesis catalyst.
介绍了该催化剂的特性和装填方法;论述了升温还原方案和操作要领;通过生产运行数据的比较,对A203型氨合成催化剂的应用效果进行了评价。
2) Loading
[英]['ləudiŋ] [美]['lodɪŋ]
装填
1.
Data communication research on simulation system of laucher rocket loading training;
火箭炮装填训练摸拟系统数据通信研究
2.
Design and Implementation of Visual Simulation System for Rocket Launcher Loading Training;
火箭炮装填训练视景仿真系统的设计与实现
3.
Even and dense catalyst loading is one of the essential prerequisites for efficient operation and long tube life in a primary steam reforming furnace of all ammonia and methanol synthesis factory.
在蒸汽转化炉的炉管内,催化剂装填的均匀、结实程度是实现转化操作高效和延长炉管寿命的一个十分重要的先决条件。
3) load
[英][ləʊd] [美][lod]
装填
1.
One approach to load of stationary yeast is operated in fermentation tanks and the other one in yeast tanks.
对固定化酵母的两种装填方式进行比较 ,一种是在发酵罐中装填 ,一种是在酵母罐中装填。
2.
The effective use of transform catalyst during the methanol production is discussed in this article from the catalyst loading, oxidation, deoxidization, etc.
从催化剂的装填及催化剂的氧化还原等方面探讨了如何高效使用甲醇转化催化剂。
4) packing
[英]['pækɪŋ] [美]['pækɪŋ]
装填
1.
Maximum caving degree algorithm for rectangle and circle packing problem;
求解矩形和圆形装填问题的最大穴度算法
2.
Many factors on micro laboratory device for solid catalyst evaluation were discussed,including the structure of reactor,flow control pattern,catalyst packing and diluent selection.
在对环氧乙烷银催化剂的微反评价工艺进行改进的基础上,讨论了反应器结构、流量控制方式、催化剂装填方式、稀释剂选择等因素对固体催化剂微反评价系统的作用,以及对催化剂反应性能评价数据稳定性的影响。
5) filling
[英]['fɪlɪŋ] [美]['fɪlɪŋ]
填料,装填
补充资料:Usp45通用自动装填手枪
【规格参数】
全枪质量: .72 千克(kg) *含弹匣
全 长: 194 毫米(mm)
枪 管 长: 108 毫米(mm)
瞄准基线: 长158 毫米(mm)
其它参数: 枪全高136mm,全宽32mm,扳机力单20n/双50n
【主要简介】
usp一开始只有9mm和.40s&w两种口径,虽然这两种型号相当受欢迎,但许多美国人始终对.45口径情有独钟,当年在美国军方选择发射9mm的伯莱达92f手枪作为制式手枪后,发射.45acp(automatic colt pistol )弹的m1911手枪系列仍在民间或各个军事部门和执法机构中广泛使用。所以hk公司便设计了发射.45acp弹的usp,并于1995年5月推出市面。
由于发射的枪弹尺寸和威力都变大了,一些部件需要强化,而外形尺寸也有一些改变。为了不使握把变得过大导致难以握持,usp原来的塑料制弹匣改为钢制弹匣,容量12发,民用型的弹匣则为10发。许多原来usp的零件和附件仍可通用,如utl等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。