1) film uniformity
成膜均匀性
2) film formation
成膜
1.
Research status and prospect of film formation process of resin latex;
树脂乳胶成膜过程的研究现状与前景
2.
The results also showed that the haten-baeed ink tan bellen film formation on the new.
对水性油墨的胶体化学特性及水性油墨在新闻纸表面的成膜特性进行了研究。
3.
The effects of temperature on film formation of the poly(styrene-co-butyl acrylate)/poly(butyl acrylate-co-methyl methacrylate)(P(St-co-BA)/P(BA-co-MMA)) core-shell latex and properties of the film were studied.
研究了温度对P(St-co-BA)/P(BA-co-MMA)核壳型复合胶乳的成膜及其性能的影响。
3) filming
成膜
1.
Determination of the minimum formation temperature and filming properties of carboxylated NBR latex;
胶乳的最低成膜温度测定及其成膜性
2.
Research of High-molecular Permeability Film-The Composition of Polydiphenylsiloxane -Pdyurethane and Filming Permeability;
高分子透气膜研究──Ⅰ聚二苯基硅氧烷－聚氨酯共聚物的合成及成膜透气性
3.
Evolution of processes of filming,coloring and sealing is discussed.
概括叙述了铝合金表面处理工艺 ,着重阐述了成膜、着色、封孔三步骤的不同工艺进展情况及工艺的发展对铝合金用途和性能的影
4) film forming
成膜
1.
To prevent solids and filtrates of drilling fluid into different reservoirs effectively and prevent formation damage,the film forming,sealing,low invasion and reservoir protection drilling fluid was developed in which the film forming agent,special sealing agent and fluid loss control agent are essential to this fluid.
为使钻井过程所采用的钻井液对所钻遇的不同渗透率油层均能有效地阻止其固相与液相进入油气层,不诱发储层的潜在损害因素,防止对储层发生损害,提出了成膜封堵低侵入保护油气层钻井液技术的新构思。
2.
The mechanism of film forming for imidazole and its derivatives on the surface of copper was developed by means of comparing the structures of t.
引 言咪唑化合物是近年来研究较多的一类杂环化合物 ,在生物工程、医药、高性能复合材料等领域显示了重要的学术价值和突出的应用前景[1～ 4 ] 尤其咪唑化合物与金属铜具有很好的配位反应活性 ,能瞬间吸附在铜表面 ,生成致密的防氧化、抗腐蚀薄膜 (0 2 0～ 0 4 0 μm) ,成为一类优良的金属表面处理剂 ,是制造高精密微型计算机的优良化学材料 ,但是有关咪唑化合物在金属表面成膜过程与机理方面的研究还不多见 。
3.
This article has studied the changes of structure of montmorillonite during the film forming process of acrylate/montmorillonite compound emulsion.
对丙烯酸酯 /蒙脱土复合乳液干燥成膜过程中蒙脱土结构的变化进行了研究。
5) film-forming
成膜
1.
Furthermore,the rheologic performance and film-forming of the emulsion were inspected.
研究了乳液的室温流变性并跟踪了乳液的成膜情况。
2.
In this paper,several kinds of film-forming methods and their development of membrane of photocatalytic TiO 2 film are discussed.
综述了TiO2 光催化膜的各种成膜方法及其进展 ,其中包括在陶瓷玻璃等耐热基材上的TiO2 烧结法 ,近年来发展很快的用于塑料等非耐热性材料的粘合剂成膜法 ,以及用于无纺布的抄造法和水泥的混练法
6) Film
成膜
1.
Formation of 2-subsituted-benzimidazole film on copper surface;
2-取代苯并咪唑在铜表面的成膜过程研究
2.
The p rocess,structure and film forming mechanism of Dacromet technology and Ni-W-P chemical plating coat are introduced.
分别介绍了达克罗技术与化学镀Ni-W-P合金镀层的工艺特征、结构组成、成膜机理。
参考词条
补充资料：成膜助剂
分子式：
CAS号：
性质：又称聚结助剂。能促进高分子化合物塑性流动和弹性变形，改善聚结性能，能在较广泛施工温度范围内成膜的物质。是一种易消失的增塑剂。常用的为醚醇类高聚物的强溶剂，如丙二醇丁醚、一缩丙二醇甲醚醋酸酯等。
CAS号：
性质：又称聚结助剂。能促进高分子化合物塑性流动和弹性变形，改善聚结性能，能在较广泛施工温度范围内成膜的物质。是一种易消失的增塑剂。常用的为醚醇类高聚物的强溶剂，如丙二醇丁醚、一缩丙二醇甲醚醋酸酯等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。