1) Suspended bed
悬浮床
1.
Experiment research and numerical simulation of thermal process in a suspended bed for Si_3N_4 synthesis;
悬浮床氮化硅合成热过程的实验研究与数值模拟
2.
Residue hydrotreating in suspended bed,compared with residue upgrading in fixed bed,is a novel method for heavier oil hydroprocessing.
固定床渣油加氢改质技术是比较成熟的重质油加工手段,而悬浮床渣油加氢技术是较新的重油轻质化方案。
3.
Catalytic activity of the catalysts is the key problem in the industrialized course of suspended bed hydrocracking technology.
催化剂的加氢裂化-抑焦活性是影响渣油悬浮床加氢工艺工业化的一个关键因素,因此在催化剂复配筛选过程中,采取一种合理公正的方法来评价催化剂的活性就显得更为重要。
2) slurry bed
悬浮床
1.
Catalyst for slurry bed hydrocracking of heavy oil has undergone two development phases, i.
综述了重质油悬浮床加氢工艺的最新进展,并对分散型催化剂的开发进展进行了系统的总结。
2.
Development,processing technology and its characteristics of residue oil hydrotreating process in China were introduced,main concerned problems on commercial application of heavy oil hydrotreating processing were analysised,comparison on marketing,feedstocks and processing between fixed bed and and slurry bed residue hydrotreating processing technology were carried out in this paper.
分析了重油加氢处理工业化中主要考虑的问题,从市场、原料、工艺等方面比较了固定床和悬浮床两种渣油加氢处理技术。
3.
Hydrocracking of atmospheric residue was carried out in a slurry bed.
以塔河稠油常压渣油为原料,进行悬浮床加氢裂化反应,用非水溶液滴定法测定各产物中的碱性氮含量,用舟进样化学发光法测定产物中的总氮含量;考察了催化剂种类、催化剂含量对产物氮分布的影响。
3) Suspension bed
悬浮床
1.
Suspension bed hydrocracking technology and water soluble catalyst were used for upgrading of atmospheric residue from Dagang oil field.
采用悬浮床加氢技术和水溶性分散催化剂对大港常压渣油进行了轻质化和改质研究。
2.
Multimetal water soluble catalyst and suspension bed hydrocracking technology were used for Liaohe atmospheric residue upgrading.
采用悬浮床加氢技术和水溶性分散催化剂对辽河坨子里稠油的常压渣油进行了轻质化和改质研究。
3.
Objective To find safe and effective treatment for large-area burn patients with hyperosmotic dehydration bedridden in suspension bed.
目的 为大面积烧伤病人卧悬浮床并发高渗性脱水的治疗寻找安全、有效方法。
4) Slurry
[英]['slʌri] [美]['slɝɪ]
悬浮床
1.
Study on a New Hydro-visbreaking Process for Tahe Residue in Slurry;
塔河渣油悬浮床减粘工艺研究
2.
Effect of reaction conditions on hydrocracking in slurry bed;
反应条件对悬浮床加氢裂化过程的影响
3.
Hydrogenation Mechanism of Residue in Slurry;
渣油热反应性能与悬浮床加氢反应机理
5) air-fluidized bed
悬浮床
1.
Nursing of air-fluidized bed in patients with severe burn;
悬浮床在治疗重度烧伤患者中的应用和护理
6) slurry-bed hydrocracking
悬浮床加氢
1.
Based on the features of the recycling residue of slurry-bed hydrocracking for residue,a hydrocyclone was designed and separating tests under hot conditions with recycling residue were carried out.
针对重油悬浮床加氢工艺循环油浆液固密度差小、胶质沥青质含量高等特点,设计加工了油浆分离用旋液分离器,热模试验结果表明旋液分离器对于循环油浆中的甲苯不溶物具有较好的分离效果;同时对于油浆中的胶质沥青质具有一定的分离效果,可在一定程度上改善循环油浆性质、延缓设备反应器结焦趋势。
2.
The slurry-bed hydrocracking bottom oil from Karamay atmospheric residue(KMHR)was separated into 8 narrow fractions and an end-cut by supercritical fluid extraction and fractionation(SFEF)technology.
用超临界流体萃取分馏(SFEF)装置将克拉玛依渣油悬浮床加氢尾油(KMHR)分离为8个窄馏分和萃余残渣。
补充资料：沸腾床燃烧(见流化床燃烧)
沸腾床燃烧(见流化床燃烧)
boiling-bed combustion:see fluidized-bed combustion
沸腾床燃烧(boiling一bed eombustion)见流化床燃烧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条