1) Co-base alloy TEM microstructure
Co基合金微观组织
2) microscopic metallographic structure
微观金相组织
1.
Its chemical composition ,shorttime tensile properties at high temperature, microscopic metallographic structure, and deterioration of service life are compared to those of conventional furnace tubes.
对静态铸造的含静态混合元件的乙烯炉管,进行了高温机械性能和微观组织的评价,对其材料的化学成分、高温短时拉伸性能和微观金相组织与寿命消耗分散程度等方面进行了与常规炉管的对比分析。
3) Co-based alloy
Co基合金
1.
Microstructure and property of laser cladded Co-based alloy on Ni-b ased alloy;
Ni基合金表面激光熔覆Co基合金的组织与性能
2.
Microstructure and properties of TiB_2 reinforced Co-based alloy coating by laser cladding;
激光熔覆TiB_2增强Co基合金涂层的组织与性能
3.
By means of optical microscope(OP),scanning electron microscope(SEM),hardness test and high temperature wear test,remelted hardface layers of Co-based alloy with different aging temperatures and time were studied.
通过金相、扫描电镜显微组织分析,显微硬度测定,高温磨损试验,对经不同工艺参数时效处理的Co基合金堆焊重熔层进行了分析研究。
4) cobalt-base alloy
Co基合金
1.
Through smelting cobalt-base alloy with different component,the corrosion resistance and mechanical property of the bushings were tested and compared in order to obtaine the best composition(wt%: 55.
重点探讨了轴套材料的耐腐蚀性能和力学性能,通过熔炼不同成分的Co基合金,对其性能进行测试和对比,得出综合性能最好的合金成分(质量分数,%)为:55。
5) Co based alloy
Co基合金
1.
Stellite Co based alloy coatings deposited by laser cladding using synchronous feeder on 45 # steel are introduced.
采用同步送粉式激光熔覆工艺在 45 # 钢表面制备了StelliteCo基合金涂层 。
6) matrix microssopic organzation
基体微观组织
补充资料：GH130铁基高温合金组织
GH130铁基高温合金组织
GHl30铁基高温合叠(700。C保温20分钟)细织中的7’、TiC、Laves相
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条