1) aramid fiber
芳纶纤维
1.
General Situation of Development of Surface Treatment Technology for Aramid Fiber;
芳纶纤维表面处理技术的发展概况
2.
Application of aramid fiber in tyre industry;
芳纶纤维在轮胎工业中的应用
3.
The comparing research on the aramid fiber and carbon fiber strengthening concrete structure;
芳纶纤维与碳纤维加固混凝土结构的比较研究
2) Kevlar fiber
芳纶纤维
1.
Interfacial properties of phosphorous acid modified Kevlar fiber reinforced epoxy resin composites;
芳纶纤维的磷酸表面处理及其树脂基复合材料界面性能
2.
Epoxy matrix for Kevlar fiber reinforced filament wound composites;
磷酸处理芳纶纤维的缠绕环氧树脂基体
3.
The seismic performance of masonry structure strengthened by kevlar fiber;
应用芳纶纤维加固砖砌体的抗震性能
3) aramid fibre
芳纶纤维
1.
After heat-calendering,glass transition temperature of paper-based aramid fibre is heightened with its increase of the cohesive energy density and crystallinity.
测定了热压光前后纸基芳纶纤维的内聚能密度、结晶度大小、粘度及粘均相对分子质量,研究了芳纶纸基纤维玻璃化温度与内聚能密度及结晶度的关系。
2.
The aramid fibre was applied in the guiding optical cable, because of its outstanding performance.
芳纶纤维由于其高耐温、高强、高模等优异性能,被应用于制导光缆上。
3.
The interfacial bond behaviour of the composite of AFR resin reinforced with aramid fibre was investigated by the methods of macromechanics,micromechanics and contact angle.
为了改善芳纶纤维复合材料的界面粘结性能,从自制树脂基体入手,针对芳纶纤维的结构特点,合成了一种新型树脂(AFR)作为基体,制备了芳纶/AFR复合材料。
4) aramid fibers
芳纶纤维
1.
Therefore, aramid fibers can be protected from photodegradation and prolonged their longevity of use by addition of proper anti-UV agers capable of inhibiting light within wavelength.
芳纶是一种光敏感的高分子材料,容易在紫外线照射下发生光老化降解,而280～320nm范围的紫外光对芳纶光降解作用最强,采用适当的抗紫外老化剂以阻隔这一波段的紫外光将可以提高芳纶纤维的使用寿命。
5) Kevlar
[英]['kevlɑ:] [美]['kɛvlɑr]
芳纶纤维
1.
Surface Treatment and Dipping Procrss of Kevlar Fiber;
芳纶纤维表面处理与浸渍工艺研究
2.
Study of the Tribological Properties of Kevlar Fabric;
芳纶纤维织物摩擦磨损性能的研究
3.
According to the characteristics of kevlar request of wovenfabric,network process is used for preparing processes of kevlar.
根据芳纶纤维的特性及织物要求，采用了以网络加工为主的芳纶纤维制织的准备工艺，利用正交实验法，确定了芳纶纤维的网络加工工艺参
6) aramid fiber 1313
芳纶1313纤维
1.
The article first introduces the R & D progress of aramid fiber 1313, then makes an overview on the structure and performance of the fiber and finally discusses the development in polymerization of meta-aramid, the fiber-making methods and related modification t.
芳纶1313纤维具有优异的耐高温和阻燃性能、良好的可纺性和尺寸稳定性、较好的机械性能,是目前技术比较成熟,使用最为广泛的本质阻燃纤维。
补充资料：芳纶纤维
芳纶纤维的国外商品名为Kavlar纤维，简称K纤维，国产牌号芳纶1414，化学名称为聚对苯二甲酰对苯二胺(p-phenyleneterephthalamide)，相对密度1．43～1．45，无熔融温度，500～570 ℃时分解。芳纶纤维的最大特点是密度低、强度高、耐高温，密度比碳纤维低17％。单丝强度可达3850MPa，比强度约为钢丝的5倍。冲击强度为石墨纤维的6倍。有较高的断裂伸长率，没有碳纤维那样脆。芳纶纤维具有良好的热稳定性、耐火性、耐疲劳性、耐泊性、耐醋碱性。体膨胀系数较小，尺寸稳定性极好。使用温度-190～260 ℃。溶于98％的浓硫酸。
用作树脂高强、耐高温纤维增强填充剂。
用作树脂高强、耐高温纤维增强填充剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条