1) Molecule imprinting
分子烙印
1.
Molecule imprinting polymers (MIP) for sarin were made with different chemical composition.
以有机磷毒剂沙林为烙印分子，采用不同单体、交联剂及制孔剂制备了一系列分子烙印聚合物，从中筛选出了几种对沙林有很高吸附率（＞90％）的聚合物。
2.
The principle of molecule imprinting technique was introduced and the applications of this technique were reviewed.
本文系统地介绍了分子烙印技术的发展现状及其在各个方面的应用。
2) molecular imprinting
分子烙印
1.
The anti-tumor components, harmaline and harmine, in the crude extract of Peganum nigellastrum were separated and identified simultaneously from the complex matrix by connecting the molecular imprinting affinity column with a posit.
以骆驼蓬种籽中抗肿瘤活性化合物哈尔明及哈马灵的结构类似物哈尔满作为模板 ,用非共价键法制备了对哈尔明及哈马灵具有强亲和性的分子烙印聚合物 。
3) Molecularly imprinted polymer
分子烙印聚合物
1.
Solid phase extraction behavior of molecularly imprinted polymers for nerve agent degradation products;
分子烙印聚合物对神经性毒剂降解产物固相吸附行为研究
2.
With micro-porous silica functioned with 3-(trimethoxysilyl)propyl methacrylate reagent as carrier,a kind of novel molecularly imprinted polymer bound on silica surface was synthesized by using MAA and(quinine) as functional monomer and template respectively.
用γ-(甲基丙烯酰氧)丙基三甲氧基硅烷修饰的微粒硅胶作基质,以甲基丙烯酸(MAA)为功能单体,奎宁为模板,制备得到一种新型的硅胶表面键合分子烙印聚合物(M IP),用红外光谱对聚合物进行了表征;用荧光发射光谱和紫外光谱预测了奎宁分子与MAA相互作用形成的超分子复合物;通过平衡吸附实验评价了所制备聚合物的吸附性能,结果显示,模板聚合物与空白聚合物有较大差异,对模板最大特异性吸附量值为36。
3.
OBJECTIVE To investigate the molecular recognition mechanism of molecularly imprinted polymer(MIP) and its influence factors.
目的探讨分子烙印聚合物(molecularly imprinted polymer,MIP)分子识别能力的机制及影响因素。
4) Molecular imprinting technique
分子烙印技术
1.
A molecular imprinting polymer particular effect for triadimenol was prepared by molecular imprinting technique.
实验采用分子烙印技术合成了对农药三唑醇有特异性作用的分子烙印聚合物(molecularlyim printedpolymer,MIP)。
2.
The molecularly imprinted solid-phase extraction (SPE) cartridge of chloramphenicol(CAP) was prepared by adopting molecular imprinting technique,and its absorption ability as well as desorption conditions was investigated,on the basis of which the working conditions of SPE cartridge,including the solvent for CAP,the rinse and elution conditions,were ascertained.
采用分子烙印技术制备了氯霉素的分子烙印固相萃取柱 ,并通过对其吸附能力、解吸条件等特性的研究 ,确定了分子烙印固相萃取柱的上柱、淋洗和洗脱条件 。
3.
The molecular imprinting technique is a reliable technique for the preparation of materials of predetermined se-lectivity.
分子烙印技术是一种能制备预定选择性分离介质的技术。
5) Molecular imprinting stationary phase
分子烙印固定相
6) molecular imprinted polymer
分子烙印聚合物
1.
The adsorptivities in solvents with different polar of molecular imprinted polymers (MIP) which were made in different conditions to 2,4 D were also studied.
利用离线超临界流体萃取与高效毛细管电泳相结合 ,分析了标准添加样品中的除草剂 (2 ,4 二氯苯氧乙酸 (2 ,4 D) ) ,探讨了温度、压力和改性剂对萃取的影响 ;考察了在不同条件下合成的以 2 ,4 D为烙印分子的分子烙印聚合物对 2 ,4 D在不同极性溶剂中的吸附能力 ,并将分子烙印聚合物作为超临界流体萃取后处理用固体吸附剂。
2.
Molecular imprinted polymer is a kind of host molecules with high selectivity of molecular recognition.
分子烙印聚合物 (molecularimprintedpolymer)是一种高选择的有分子记忆效应的主体分子 ,通常在非极性环境中制备和应用。
补充资料：烙印
分子式：
CAS号：
性质：生皮的一种缺陷。是为了标记家畜而在皮上留下的烙印疤，多见于牛皮和马皮。烙印疤往往在皮的臀部，因臂部是制革的主要部位，故而影响成革的使用范围并降低出裁率。
CAS号：
性质：生皮的一种缺陷。是为了标记家畜而在皮上留下的烙印疤，多见于牛皮和马皮。烙印疤往往在皮的臀部，因臂部是制革的主要部位，故而影响成革的使用范围并降低出裁率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条