1) zirconium oxide
氧化锆
1.
Preparationof spherical zirconium oxidenano-crystals by solid state reaction at room temperature;
室温固相合成球形氧化锆纳米晶体
2.
Determination of zirconium oxide and hafnium oxide in mineral and reagent by X-ray fluorescence spectrometry
X射线荧光光谱法测定矿物及试剂中氧化锆和氧化铪
3.
The catalytic activities of a series of metal oxides supported by zirconium oxide for selective catalytic reduction (SCR) of NO with propene as a reductant in the condition of oxygen-rich were investigated.
研究了负载于氧化锆载体上的多种金属氧化物在富氧条件下,以丙烯为还原剂,选择性还原NO的活性,考察了CuO和Ag的负载量与活性关系,CuO和Ag单独负载与共同负载时的催化性能,以及氧气浓度对催化剂活性影响。
2) ZrO_2
氧化锆
1.
Preparation of Nanometer ZrO_2 with High Dispersibility by Microemulsion;
微乳液法制备高分散性纳米氧化锆
2.
Nano-ZrO_2 coating synthesis by irradiating composites of gel and nano-powder using Nd:YAG laser;
Nd:YAG脉冲激光作用溶胶与纳米粉复合层制备复合纳米氧化锆涂层
3.
Effect of ZrO_2 addition on properties of Al_2O_3 ceramics;
添加氧化锆对氧化铝陶瓷的性能的影响
3) ZrO2
氧化锆
1.
Nano-ZrO2 was prepared by hydrothermal method,and the product of ZrO2 was modified with oleic acid.
采用水热法制备了平均粒径小于10 nm左右的氧化锆。
2.
Under different solidification condition,ZrO2 ceramic had different phase-structure properties.
本文利用氧化锆陶瓷在不同凝固成形条件下具有相结构变化的特点,将其作为激光熔覆涂层的增韧相。
3.
Effect of w(ZrO2) on the mechanical properties and microstructure of AlZrx were discussed.
采用包裹共沉淀法制备了韧性氧化铝-氧化锆纳米复合渗透陶瓷(AlZrx),其中AlZr30的平均三点弯曲强度(σ3P)高达(621。
4) ZrO 2
氧化锆
1.
In this paper the products which have high properties and lower producing cost,ZrO 2 toughened Al 2O 3 wear resistance ceramic parts made of industrial raw materials is studied and satisfied demand of industrial manufacture.
本文对以工业级原料为主制得的氧化锆增韧氧化铝陶瓷耐磨部件进行了研究 ,用该技术制得的耐磨陶瓷部件具有产品性能好、生产成本低等特点 ,并能满足工业化生产要
2.
It is showed that the range of the electronic characteristic oxygen pressure at 900℃ are Pa Self-made ZrO 2 electrolytes can be used to determine the oxygen concentration in the carburizing atmosphere on which the effects of the electronic conductivity on cell emf.
:本文用从铝液和银液中抽氧的库仑滴定法测量了自制氧化钇稳定的氧化锆固体电解质的电子特征氧分压P 。
5) zirconium dioxide
二氧化锆
1.
Study on new crystalline process for the preparation of zirconium dioxide by lime-roasting method;
石灰法制取二氧化锆生产中结晶新工艺研究
2.
The preparation processes of nanometer zirconium dioxide were introduced.
简要介绍了纳米二氧化锆的制备方法,综述了各种方法的优点及存在的缺陷；另外,介绍了其作为催化剂在有机合成等方面的应用,论述了发展纳米二氧化锆的重要性。
3.
Inductively coupled plasma atomic emission spectrometry (ICP-AES) was used for the determination of La and Y in high purity zirconium dioxide after matrix extraction using 1-phenyl-3-methyl-4-benzoyl-5-pyrazone (PMBP) as extractant.
利用 1-苯基 - 3-甲基 - 4-苯甲酰基 -吡唑酮 [5 ](PMBP) -氯仿溶液在高酸度下对锆的选择性萃取 ,使基体与待测元素分离 ,然后以电感耦合等离子体原子发射光谱 (ICP -AES)法 ,测定了高纯二氧化锆中痕量杂质元素La和Y的含量 ,样品分析结果满意。
6) zirconium oxychloride
氯氧化锆
1.
Study on preperations of crystalline layered sodium disilicate with wastes of zirconium oxychloride
氯氧化锆废弃物制备层状硅酸钠的研究
2.
ZnO green phosphor preparation process by the thermal oxidation of zinc sulfide with zirconium oxychloride as additive is investigated.
研究以氯氧化锆为添加剂的硫化锌热氧化法合成ZnO绿色荧光粉的过程。
3.
The acid property of zirconium oxychloride was characterized by means of DTA and FT-IR spectra of pyridine absorbed on the surface.
采用DTA和吸附吡啶的FT-IR表征氯氧化锆的表面酸性,用Hamm ett指示剂测定其酸强度,以催化合成环己酮2,3-丁二醇缩酮为探针反应优化缩酮反应条件,并考察它对其他缩酮反应的催化活性,比较了不同催化剂对缩酮活性的影响。
补充资料：氧化锆
分子式：ZrO2
分子量：123.22
CAS号：1314-23-4
性质：暂无
制备方法：暂无
用途：用于制金属锆和锆化合物、制耐火砖和坩锅、高频陶瓷
分子量：123.22
CAS号：1314-23-4
性质：暂无
制备方法：暂无
用途：用于制金属锆和锆化合物、制耐火砖和坩锅、高频陶瓷
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条