1) room temperature curing
常温固化
1.
This paper introduces the characteristics of acrylates in chemistry reactions and the compositions,the applications and the current research progress of room temperature curing acrylate adhesives,which include the first,second and third generation acrylates adhesives,acrylic anaerobic adhesive,acrylic pressure sensitive adhesive and α-cyanoacrylate adhesive.
分析了丙烯酸酯的反应特点,介绍了第一、二、三代丙烯酸酯胶粘剂、丙烯酸酯厌氧胶粘剂、丙烯酸压敏胶粘剂以及α-氰基丙烯酸酯胶粘剂这几种常温固化丙烯酸酯胶粘剂的组分、应用及其研究进展。
2.
A high temperature resistant coating is developed which is composed of epoxy organosilicon resin, nano-filler and room temperature curing agent.
以环氧树脂化学改性有机硅树脂为基体材料,纳米粒子为填料并采用了常温固化体系,研制了耐高温防护涂层。
3.
Study on high temperature resistance adhesive for room temperature curing;
实验结果表明,该胶粘剂可常温固化,加固后的构件可在常温与高温(150℃)环境中长期使用;该胶粘剂在150℃时的剪切强度为17。
2) ambient cure
常温固化
1.
A new kind of nonstick coating which can be ambient cured was developed and introduced,(PTFE) and sl-619 were added into mixed solvent,and get suspension liquid after fully scattering,in addition go into FEVE and addition agent mixed,then can get nonstick.
将聚四氟乙烯(PTFE)超细粉和分散助剂sl-619加入脂类混合溶剂中充分分散,得到悬浊液;加入FEVE树脂和助剂,均匀混合后,就得到可在常温固化的不粘涂料。
2.
This kind of ambient cure FEVE paint has excellent physical and mechanical properties,and can be applied widely in anti-corrosion engineering, architecture field,etc.
通过对常温固化用固化剂类型、用量及其它助剂对涂料、涂层性能影响的综合分析,研制了一种常温固化溶剂型聚三氟氯乙烯(FEVE)涂料。
3) air curing
常温固化
1.
The paper introduced the technical progress in air curing fluorinated polyurethane coatings.
介绍了常温固化含氟聚氨酯涂料的研究进展。
5) curing at room temperature
常温固化
1.
In this paper,a resisting high temperature adhesive curing at room temperature was synthesized with Ba phenotic resin,modified epoxy resin,butadiene nitrile rubber,polyvinyl butyral and silane coupling agent as the first component,a composited polyamine curing agent as the second component.
以钡酚醛树脂、改性环氧树脂、丁腈 - 40、聚乙烯醇缩丁醛和硅烷偶联剂为甲组分 ,复合多元胺类固化剂为乙组分 ,合成出常温固化的耐高温粘接剂。
补充资料：常温固化型缩水甘油酯
分子式：
CAS号：
性质：可在室温固化的缩水甘油酯型环氧树脂。常用室温固化剂为酸酐，而不能像双酚A缩水甘油醚那样用脂肪族胺。采用常温固化剂虽然温度较低，操作方便，但固化物耐热性较差。改用高温固化剂可以得耐热性优良，机械强度好的固化物。
CAS号：
性质：可在室温固化的缩水甘油酯型环氧树脂。常用室温固化剂为酸酐，而不能像双酚A缩水甘油醚那样用脂肪族胺。采用常温固化剂虽然温度较低，操作方便，但固化物耐热性较差。改用高温固化剂可以得耐热性优良，机械强度好的固化物。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条