1) Granulation
[英][,grænju'leiʃən] [美][,grænjə'leʃən]
造粒
1.
Factors affecting the granulation of DAP;
影响磷酸二铵造粒的因素
2.
Application of modified starch adhesive in granulation of compound fertilizer;
改性淀粉黏结剂在复混肥料造粒中的应用研究
3.
Process design of small bulk polypropylene modified granulation;
小本体聚丙烯改性造粒工艺的设计
2) prilling
[英][pril] [美][prɪl]
造粒
1.
The continuous operation of the plant has been extended through the improvement in process and equipment, and the excessive workload of the prilling tower has been overcome.
简述了国产滚筒式大颗粒尿素装置的工艺流程及原理,分析了生产中存在的问题,通过对工艺操作和设备的改进,生产连运时间由10多天提高到2个多月,解决了造粒塔负荷重的问题。
2.
New equipment of prilling spray with three-fluid admixture at outlet,air particle separator with two-stage series connection,powder-paste converter and dust remover with three rotating flows and falling-film spray were developed.
总结了用于造粒和干燥操作能同时完成的气流喷雾造粒干燥技术。
3.
In production,the special physical and chemical property of the wet material and high water content make the prilling and drying very difficult.
在生产中，因其湿物料物化性质较特殊，含水量大，致使其造粒干燥很困难。
3) granulating
[英]['grænjuleit] [美]['grænjə,let]
造粒
1.
From the aspects of technical condition,granulating fixture and additives,some suggestions on improvement were put forward.
分析了气相法生产线性低密度聚乙烯(LLDPE)装置粒料颜色变黄的原因,从工艺条件、造粒设备、添加剂等几方面提出了改进措施。
2.
According to the status, development and characteristics prescription of slow release fertilizer,investment for equipment,scale of production,quality of products and environment protection of main granulating methods(compressing, granulating, coating/starching) are analyzed and evaluated.
根据缓 /控释复合肥的现状、发展及肥料配方的特性 ,对缓 /控释复合肥的主要造粒方法 (挤压法、团粒法、料浆法 )的工艺技术、设备投资、生产规模、产品质量及环保等方面的情况进行了综合分析和评价 ,为选择缓 /控释复合肥生产工艺提供参考。
3.
The research of the softening charac teristics,DTA(differential thermal analysis)and granulating for waste plastics was described.
对废塑料的软化特性、差热分析及热态造粒工艺进行了系统的研究。
4) Pelleting
[英]['pelit] [美]['pɛlɪt]
造粒
1.
Experimental study on improving effect of pelleting and flotation of fine grained lignite;
提高细粒褐煤造粒浮选效果的试验研究
2.
Effects of organic types on the characteristics of pellets in a self-pelleting fluidized bed reactor
不同形态有机物对自我造粒流化床中颗粒特性的影响
3.
Magnetic microspheres were obtained by preparation of fine powders, pelleting and heat treatment.
本论文针对现有栓塞材料存在的问题,如粘管、透X线、可控性差等,选择钡铁氧体无机颗粒作为研究体系,通过微粉的制备、粉料的造粒和热处理,获得了适合应用的磁性微球,并对其相关性能进行了分析。
5) granule size
造粒粒度
6) granulating by disc granulator
团粒造粒
补充资料：造粒
分子式：
CAS号：
性质：使固体粉末聚集成一定大小的颗粒称为造粒。含有水分或其他黏合剂溶液的粉末经振荡后聚集成颗粒。造粒可在振荡或造粒机中进行。加工方法有六种：包衣法、挤出成型法、吸附法、流化床法、喷雾法和转盘法。造粒可以增加粉末的光滑性，从而使压片时加料迅速和均匀。造粒还可提高粉末的密度，有助于压片时冲头的活动，并减少潜入空气的危险，提高压片强度。
CAS号：
性质：使固体粉末聚集成一定大小的颗粒称为造粒。含有水分或其他黏合剂溶液的粉末经振荡后聚集成颗粒。造粒可在振荡或造粒机中进行。加工方法有六种：包衣法、挤出成型法、吸附法、流化床法、喷雾法和转盘法。造粒可以增加粉末的光滑性，从而使压片时加料迅速和均匀。造粒还可提高粉末的密度，有助于压片时冲头的活动，并减少潜入空气的危险，提高压片强度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条