1)  Ignition characteristics+
点火特性+
2)  ignition characteristics
点火特性
1.
Effect of primary air velocity and pulverized coal concentration on the ignition characteristics of the first stage chamber for plasma burner;
一次风速度和煤粉质量浓度对等离子燃烧器一级燃烧筒点火特性+的影响
2.
And the factors including air flowrate, atomizing air pressure, oil flowrate, viscosity of oil, and temperature in the furnace, which influence the ignition characteristics of an air swirl atomizing spray nozzle were discussed.
进行了点火试验研究,探讨了助燃风量、雾化气压力、喷油量、燃油粘度及炉膛温度等因素对气动旋流喷嘴点火特性+的影响。
3.
Many tests have been done to determine the ignition characteristics of minute solid rocket motor.
设计了一种适用于某微小型固体火箭发动机的点火器 ,对某微小型固体火箭发动机的点火特性+进行了大量试验研究 ,引入了初始点火压强的概念 ,找出了影响点火延迟时间散布的主要规律 ,确定了能满足微小型固体火箭发动机点火性能的点火方
3)  ignition characteristic
点火特性
1.
Using the available data from 3 starts in simulated altitude tests,the windmilling start ignition characteristic of a turbofan engine was analyzed in this paper.
发动机点火特性+是其在极限高度与极限边界成功起动的重要影响因素。
4)  ignition
点火
1.
The HTM furnace ignition abnormal reasons and countermeasures;
热媒炉点火失常的原因及对策
2.
Application of Long-Distance Autoignition Technology and Voltage Stabilization Control System in Gas Bleeding Device;
远程自动点火和稳压控制系统在煤气放散装置上的应用
3.
Design of Laser Diode Driver for Ignition;
激光二极管点火用驱动电路设计
5)  firing
点火
1.
Research on start-up mode for fluidized bed boiler firing;
流化床锅炉点火启动方式的分析与比较
2.
This equipment can also be used for firing of sintering machine, its efficiency is 800kW/M and the productive capccity of sintered ore can be increa.
电弧等离子体发生器装置及其附件用于连铸的中间包加热,装机功率达1000kW,耗电5～10kWh/t钢;用于烧结机点火,功率为800kW/h,兼收烧结产量可提高5%。
6)  igniting
点火
1.
Discussion on application of plasma igniting technique in electric power plant;
浅谈等离子点火技术在电厂中的应用
2.
Realization of Auto Igniting and Auto Burning Control for Home Ignitor;
国产燃烧器自动点火和燃烧自动控制的实现
3.
The igniting characteristics of large scale circulating fluidized bed(CFB) boiler are analyzed.
对大型循环流化床(CFB)锅炉点火特性+进行了研究分析。
参考词条
补充资料：催化点火
分子式：
CAS号：

性质：在催化反应器中，利用电热丝加热以点燃催化剂层，称为催化点火。如在乙醇氧化制乙醛时，为使电解银催化剂升温至550～630℃开始反应所进行的点火处理。点火圈安装在催化剂上表面约3～5cm处，点火时，电热丝因通电发红，进入反应器的原料气在电热丝上不完全燃烧产生蓝色火苗，逐渐使催化剂均匀受热，加热到一定温度后，原料气直接在催化剂上反应，此时可切断电热丝电源，催化层已被点燃。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。