1) line contact
线接触
1.
Effect of roughness on lubrication of low elastic modulus in line contact;
表面粗糙对线接触低弹性模量弹流润滑性能的影响
2.
Study of Friction Mechanism of Rubber by a Line Contact
橡胶线接触摩擦机理探究
3.
To analyze the effect of processing parameters to theoretical roughness on machined plane surface with line contact milling,the kinematic model of tool teeth in the process is built based on vector theory.
为了分析线接触铣削平面表面粗糙度的影响因素,运用矢量运算方法建立了线接触铣削平面运动学模型;根据刀齿包络原理,对工件表面理论粗糙度几何学形成机理进行了分析,建立了顺、逆铣加工中线接触铣削平面理论粗糙度的计算分析模型,提出了顺、逆铣加工理论粗糙度数值计算方法,并分析了各个加工参数对理论粗糙度的影响。
2) linear contact
线接触
1.
Simplification and application of calculation formula for linear contact minimum lubricant film thickness
线接触最小油膜厚度计算公式的简化及应用
2.
The influence of temperature field and force is studied by simulation technique, the friction quantity is calculated simulated and the model of the numerical simulation about linear contact parts is brought, which can deliver a instruction to the numerical simulation about linear.
磨损是摩擦学研究中的重要领域之一 然而,现行的磨损研究方法普遍采用大量的模拟试验来进行经验性的探索 而且,在磨损量计算中只考虑压力的影响 在考虑压力对磨损影响的同时,加入了温度影响因素,利用仿真技术对磨损量进行计算机模拟,提出了线接触零件磨损的数值仿真通用模型 对后续线接触零件磨损仿真的研究具有很大的指导意
3) line-contact
线接触
1.
The Research of Kinematic Model and Cut Remainder in Line-contact Rotating-milling Conical Surface;
线接触回转铣削外圆锥表面运动方程及残留高度分析
2.
The Experimental Research of Surface Roughness in Line-contact Milling Plane;
线接触铣削平面表面粗糙度的实验分析
3.
To analyze the machined quality of cylindrical surface with line-contact rotating-milling,the kinematic model of tool-teeth is built based on vector theory.
为了分析线接触回转铣削外圆柱工件表面加工质量,运用矢量运算方法建立了线接触回转铣削外圆柱工件运动学模型。
4) contact wire
接触线
1.
Effect of cold working on aging characteristics and mechanical properties of Cu-Cr-Zr-Y alloy contact wire;
变形量对接触线用Cu-Cr-Zr-Y合金时效特性和力学性能的影响
2.
Experimental research on continuous extrusion cladding forming of the copper-clad steel contact wire blank;
铜包钢接触线坯连续挤压包覆成形的实验研究
3.
Compare of Ag-Cu contact wire technology and properties;
银铜合金接触线的制造新工艺
5) contact curve
接触线
1.
The aim is to figure out,with the combination of the actual rolling,the shape of work-piece,the contact curve between rollers and work-piece and the interference of rollers,and the methods for inspection.
利用行星斜轧轧件变形区微分几何模型和对行星斜轧中轧辊与轧件表面数值分析,结合轧制实际情况,研究了轧件的形状、轧辊与轧件的接触线、轧辊干涉及其检验,并给出了三辊行星轧机中的实例分析。
2.
For spatial cam mechanism, it is different in pressure and pressure angle at each point with the contact curve between the cam and the roller.
空间凸轮机构接触线上每点的压力和压力角是不同的,在现有文献中对压力角的处理都是以从动滚子长度一半处的压力角作为机构等价压力角来考虑的。
6) contact wire
接触导线
1.
Progress in Special Copper Contact Wire for Railways;
轨道交通专用铜合金接触导线的研究进展
2.
The Measurement Research for Contact Wire Geometry Parameters;
接触导线几何参数测量研究
补充资料：混合式钢丝绳(见线接触钢丝绳)
混合式钢丝绳(见线接触钢丝绳)
alternate type steel wire rope
hunheshl gangslsheng混合式钢丝绳(alternate type Steez wireroPe)见线接触钢丝绳、
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条