1) spray density
喷淋密度
1.
Based on experimental apparatus, how the spray density and water temperature affected the heat and mass transfer performance of the evaporative condenser are studied.
在蒸发式冷凝器性能测试实验平台基础上,测试了水流参数如喷淋密度和水温对蒸发式冷凝器传热传质性能的影响。
2.
The effects of the spray density and the head-on air velocity on the heat transfer performance of the water film were investigated under various operation conditions.
建立了蒸发式冷凝器管外水膜传热性能测试实验平台,调节不同操作参数,测试了喷淋密度和迎面风速对管外水膜传热性能的影响。
3.
Processing the Zinc alloy white smoke includes the gaseous and granular pollutant simultaneously with the packed tower,investigating the influence degree of pH as well as spray density of absorption fluid to the processing of Zinc alloy white smoke,and inspecting the effect of alkali-acid two stages treatment.
为了治理同时含有气态和粒状污染物的锌铸型白烟,采用填料塔对其进行洗涤和吸收,考察了吸收液的pH值以及喷淋密度对锌铸型白烟处理效果的影响,并根据碱洗和酸洗的特点,考察了碱酸两级处理的效果。
2) spraying density
喷淋密度
1.
Relationships of pressure drop across the packing zone with the apparent velocity and flooding volocity with spraying density are obtained.
找出了填料层压降和空塔气速的变化关系，泛点气速和喷淋密度的关系。
2.
It is found that the main factor affecting padding + baffle plate pressure drop is gas velocity without spraying;When spraying,it is shown that gas velocity and spraying density jointly affect pressure drop.
结果发现:空塔时气速对填料+挡板压降的影响较大;有喷淋时,压降的变化主要是气速、喷淋密度共同作用的结果。
3) drenching density of nutrition solution
营养液喷淋密度
4) minimum spray density
最小喷淋密度
5) Liquid sprayed density
液体喷淋密度
6) spray distribution in the radial direction
径向喷淋密度分布
1.
In the paper pressure-type nozzle spray distribution in the radial direction was measured by measuring instrument which was fan-shaped cylinders with groups.
试验结果表明:HHSJ异型喷嘴径向喷淋密度分布的对称性较好,喷淋密度沿半径方向具有两个峰值,其中外延峰为一个明显的最高峰。
补充资料：喷淋密度
分子式：
CAS号：
性质：填料塔中单位塔截面积上的液体流量，即单位时间、单位塔截面积上的液体喷淋量。其单位为m3/(m2·s)或m3/(m2·h)。
CAS号：
性质：填料塔中单位塔截面积上的液体流量，即单位时间、单位塔截面积上的液体喷淋量。其单位为m3/(m2·s)或m3/(m2·h)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条