1) static conductive fluorocarbon coatings
氟碳导静电涂料
1.
Preparation of static conductive fluorocarbon coatings of light color for oil tank anticorrosion;
油罐氟碳导静电涂料比传统的环氧树脂导静电涂料具有更优异的涂膜性能,采用氟碳树脂为成膜物质,用浅色金属氧化物包覆的云母粉为导电填料、配制成添加型导静电防腐涂料,通过调研和试验,建议导静电涂为产品涂层电阻率控制在106～107Ω/cm2为宜,使用中控制105～109Ω/cm2。
2) antistatic coating
导静电涂料
1.
Preparation of solvent-free epoxy antistatic coating
无溶剂环氧导静电涂料的研制
2.
Based on the antistatic mechanism of doped antistatic coatings and the anti-corrosion principle of steels,the relations between the antistatic property and the anti-corrosion performance of antistatic coatings are discussed.
从添加型导静电涂料的导静电机理和钢铁的防腐蚀原理出发,讨论了导静电涂料导静电性能与防腐蚀性能的关系,认为具有良好导静电性能的涂料其防腐蚀性能必然较差的观点是值得商榷的。
3) fluorine carbon coating
氟碳涂料
1.
This text has briefly introdused the main variety of fluorine carbon coating on the market,and proposed some suggestions on the developing of fluorine carbon c oating.
我国氟碳涂料的发展十分迅速。
2.
The article reported the development situation of fluorine resin and fluorine carbon coating in domestic market,along with the current application of the main fluorine carbon coatings.
概述了我国氟树脂及氟碳涂料的发展情况,氟碳涂料中主要品种的应用状况。
4) fluorocarbon paint
氟碳涂料
1.
Dispersion of nano-TiO2 and modification of fluorocarbon paint;
纳米二氧化钛的分散及对氟碳涂料的改性
2.
Fabrication of new type fluorocarbon paint and its application research on railway vehicles;
新型氟碳涂料的开发及其在轨道车辆上的应用研究
3.
The application prospects of fluorocarbon paint in the exterior heat-protective system and the development trends thereof are also described.
介绍了我国关于推广使用外保温技术的有关政策,我国氟碳涂料在外墙外保温体系的应用前景及今后氟碳涂料的发展方向。
5) fluorocarbon coatings
氟碳涂料
1.
Field exposure test and date analysis of fluorocarbon coatings for the anticorrosion engineering of Main Gymnasium of Olympic Games;
奥运主体育场防腐工程用氟碳涂料天然曝晒试验与分析
2.
The paper described basic principle of film adhesion, briefly introduced matching application method of fluorocarbon coatings and discussed influences of many factors, such as degree of cross-linking, composition of solvents and adhesion promoter etc.
叙述了漆膜附着的基本原理,简要介绍了氟碳涂料的配套应用方案,探讨了交联度、溶剂组成、附着力促进剂等因素对涂层层间附着力的影响。
6) fluorocarbon coating
氟碳涂料
1.
Application of fluorocarbon coating in colour coated steel sheet;
氟碳涂料及其在彩钢材料中的应用
2.
The Application of Fluorocarbon Coating in the New Mine Area;
氟碳涂料在新建矿区的应用
3.
Application of the room temperature cured fluorocarbon coating to bridge;
常温固化氟碳涂料在桥梁领域的应用
补充资料：氟碳116
分子式：C2F6
CAS号：
性质：别名氟碳116。无色，不可燃气体。化学性质不活泼，但与可燃气体一同燃烧时，分解产生有毒的氟化物。沸点-78.2℃。熔点-100.6℃。其制法是采用活性炭直接氟化工艺路线：C+F2CF4+C2F6+C3F8+…，反应产物经过除尘、碱洗、脱水后进入低温精馏塔进行间歇精馏，提取六氟乙烷，经低温吸附提纯，可制取纯六氟乙烷。在微电子工业中用作等离子刻蚀气体，器件表面清洗，光纤生产，低温制冷剂。
CAS号：
性质：别名氟碳116。无色，不可燃气体。化学性质不活泼，但与可燃气体一同燃烧时，分解产生有毒的氟化物。沸点-78.2℃。熔点-100.6℃。其制法是采用活性炭直接氟化工艺路线：C+F2CF4+C2F6+C3F8+…，反应产物经过除尘、碱洗、脱水后进入低温精馏塔进行间歇精馏，提取六氟乙烷，经低温吸附提纯，可制取纯六氟乙烷。在微电子工业中用作等离子刻蚀气体，器件表面清洗，光纤生产，低温制冷剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条