1) critical prick force
临界刺扎力
1.
By the self-developed Fiber Axial Compression and Bending Analyzer(FACBA),the compressing and bending characteristics of ramie,flax,jute,kenaf,bamboo and bamboo pulp fibers were identified,some parameters were acquired such as critical prick force,bending rigidity and effective bending modulus,and the comparison result .
并利用自制的单纤维轴向压缩弯曲测量仪测试了苎麻、亚麻、黄麻、红麻、竹和竹浆纤维的临界刺扎力Pcr,计算抗弯刚度和等效弯曲模量,由此得到纤维刺痒特征的对比和定量表达。
2) critical stimulus
临界刺激量
3) critical stress
临界应力
1.
Improving buckling critical stress of sheet with the elastic pressure on the surfaces of sheet and it's application
板面弹性压板力对提升板料失稳临界应力的作用及其应用
2.
The distribution of interior critical stress of different casings under different circumstances are analyzed by way of the establishment of nonlinear FEM,also the critical in-situ stress equations of different operating interior pressures are achieved.
通过建立非线性有限元模型,分析了不同条件下不同套管内壁临界应力的变化规律,得到了不同生产内压下的临界地应力方程。
3.
In the paper,based on the governing equations of buckling,the buckling equation of anti-symmetrically laminated plate is established and the critical stresses are calculated under two-axial compressive loads in-plane.
应用屈曲控制方程,导出了反对称层合板在面内双向压缩下的屈曲方程,计算了相应的临界荷载并讨论了层合角对临界应力的影响,分析表明层合角对材料的临界应力有较大的影响。
4) critical pressure
临界压力
1.
New theory in the front of theoretical basis research of molecular thermodynamics 4: on molecular structure of organic compound and theoretical equation of critical pressure;
分子热力学前沿基础领域中的新理论4:论有机纯质的分子结构与临界压力理论方程
2.
Prediction of the critical pressures of alkanes using a quantitative structure property relationship;
应用QSPR方法预测烷烃的临界压力
3.
The critical pressure of two spans beams with one end fixed and the other hinge joined;
一端固支一端铰支二跨梁屈曲的临界压力
5) critical force
临界力
1.
From the angle critical force,this thesis analyses the stability of the formation of axle shaft spline in the extrusion and the calculation of the constraints available after losing stability.
从临界力的角度入手分析花键半轴在挤压成形时的稳定性及失稳后可增加约束的计算,研究表明半轴花键实现精密挤压成形不稳定时可增加约束来解决失稳问题。
2.
First we suppose a deflection expression on principle of minimum potential energy for an opening elastic rectangular thin plate loaded with critical force, which can meet the side conditions of displacement or force.
从弹性带孔矩形薄板稳定最小势能原理出发,首先设定临界力作用下的挠度表达式,使之满足箱形井塔薄板的位移或力的边界条件,然后依据整个矩形的板面积除去孔口部分的面积进行积分推演,导出最小势能原理在不同边界约束下开孔矩形薄板临界力计算公式。
3.
The mathematical model, used to calculate the buckling critical force of compliant parallel four-bar mechanism with right-angle-notch flexure hinges, was established with the approximative differential equations of the flexible curve based on the bending theory in strength of materials.
利用材料力学弯曲变形理论的挠曲线近似微分方程建立了计算直角切口柔性铰链平行四杆机构屈曲临界力的数学模型。
6) critical load
临界力
1.
The critical load of the pipe helical buckling, contact force distribution of pipe on the bore hole and the average side contact force of the pipe post buckling in the horizontal section of horizontal well are calculated by using the finite difference method and the Newton iteration method.
利用有限差分法和Newton迭代法 ,计算了斜直井段管柱螺旋屈曲临界力、沿螺旋段分布的管柱与井壁接触力以及后屈曲平均侧向接触力。
2.
The shearing force is still on the critical load.
实际受压杆件横截面上不但有弯矩而且有剪力,其剪力对临界力仍有影响。
补充资料：插刺
古代刺客的暗杀手段
插一类的农具，用于耕作，唾手可得，因此也有作为刺杀工具。晋朝王谈十多岁时，父亲被邻人窦度所杀，王谈立志报仇。他买了一把插，暗中把它磨得锋利无比。一次，王谈假装成一个农夫，在一座桥上专候窦度，等窦度上桥时，王谈突然举插猛劈过来，把窦杀死，然后主动到官府自首
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条