1) carbon-tube nanospring
碳管纳米弹簧
1.
One rapid-modeling method of carbon-tube nanospring (CTNS) was given for the FE(finite-element) software environment of ANSYS,and the axial-compression of one CTNS was simulated by using large-deformation FE method.
给出了ANSYS有限元软件中碳管纳米弹簧的快速建模方法,对碳管纳米弹簧的轴向压缩进行了大变形有限元分析。
2.
By the classical method of strength of material,the deformation of carbon-tube nanosprings(CTNS), including cylindrical,conical and looped ones,under axial-compression,is analyzed,and a general formula for stiffness of CTNSs is obtained.
分析了圆柱、柱锥形及回形纳米碳管弹簧在轴向载荷作用下的变形,给出了它们轴向刚度K_p的统一表达式,为验证K_p公式的有效性,还将圆柱形碳管纳米弹簧K_p的理论解和相应的试验结果、有限元结果进行了比较,结果发现,碳管纳米弹簧的K_p理论解和试验结果、有限元结果均较为接近。
2) Carbon Nanospring
碳纳米弹簧
1.
Molecular Structural Finite Element Analysis on Carbon Nanospring;
碳纳米弹簧的分子结构力学有限元分析
3) ZnO nanosprings
ZnO纳米弹簧
1.
By the classical method of material mechanics, the deformation of ZnO nanosprings under transverse and axial loading was analyzed respectively, and the axial stiffness of ZnO nanosprings was formulated.
分析了ZnO纳米碳管弹簧在横向、轴向载荷作用下的变形,给出了ZnO纳米碳管弹簧的横向刚度Kr与轴向刚度K1的表达式,为验证Kr、K1公式的有效性,还将一ZnO纳米弹簧Kr、K1的理论解和相应的实验结果、有限元结果进行了比较,结果发现,理论解和实验结果、有限元结果均较为接近。
4) carbon nanotubes
碳纳米管
1.
Simulation of mechanical properties of single-walled carbon nanotubes by molecular dynamics;
单壁碳纳米管力学性质的分子动力学模拟
2.
Fabrication of multi-walled carbon nanotubes/SBS composite and its electrical percolation;
多壁碳纳米管/SBS复合材料的制备及其渗流特性
5) carbon nanotube
碳纳米管
1.
Research progress in carbon nanotube used as electrode materials;
碳纳米管用作电极材料的研究进展
2.
Voltammetric behavior and analytical application of dopamine at carbon nanotube powder microelectrodes;
多巴胺在碳纳米管粉末微电极上的伏安行为及分析应用
3.
Preparation of chain-like carbon nanotubes film and its field emission properties;
链状碳纳米管薄膜的制备及场发射特性研究
6) CNTs
碳纳米管
1.
Progress of CNTs Reinforced Copper-based Composite Preparation;
碳纳米管增强铜基复合材料的制备技术研究
2.
Synthesis and Characterization of SiO_2 Thermal Insulation Aerogel Doped CNTs;
碳纳米管掺杂SiO_2气凝胶隔热材料的制备与性能表征
3.
PREPARATION AND INVESTIGATION ON PROPERTIES OF CNTs/C COMPOSITES;
碳纳米管/炭复合材料的制备及其性能的研究
补充资料：管状定向碳纳米管
纳米本意是一种长度单位,纳米材料是指材料的尺寸处于1~100nm范围内的金属,金属化合物,无机物或高分子的颗粒,对纳米材料的研究和开发依赖于能看清原子或分子世界的仪器,1993年12月中国科学院庞世瑾教授在硅表面搬走了原子,写下了"中国"的字样,人类按需要排布一个个原子的技术成为现实,前不久,我国科学家成功合成了3nm长的管状定向碳纳米管,长度居世界之首,这种碳纤维具有强度高,刚度(抵抗变形的能力)高,密度小,熔点高,化学稳定性好的特点.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条