|
|
1) waterflooding
['wɔ:tə,flʌdiŋ]
注水开发
1.
Application of steam huff and puff in middle and late waterflooding stages of common heavy oil reservoir;
蒸汽吞吐在普通稠油油藏注水开发中后期的应用
2.
The law of liquid - producing capacity in waterflooding oilfields of Liaohe oil province;
辽河油区注水开发油田产液量变化规律认识
3.
The fracture system and its effect on waterflooding in Shanshan Oilfield;
鄯善油田裂缝体系及对注水开发效果的影响
2) waterflood development
注水开发
1.
Study on adjustment technology of waterflood development of low-permeability reservoirs in the periphery of Daqing Oilfield;
大庆外围低渗透油藏注水开发调整技术研究
2.
On waterflood development effects and potential of Ma-36 well area;
马36井区注水开发效果及潜力分析
3.
Effectiveness evaluation of waterflood development in deep low permea bility reservoir of Sha 3 formation in block Wen 33;
文33块沙三段深层低渗透油藏注水开发效果评价
3) water flooding
注水开发
1.
Influence of water washing on crude oils during water flooding;
注水开发过程中原油的水洗作用初探
2.
Approach to the law of water flooding of common heavy oil reservoirs in Bi 123 and 124 fault block;
河南油田泌123、124断块普通稠油油藏注水开发规律探讨
3.
Calculation method of water flooding index for new oilfield;
新区油田注水开发指标计算方法
4) waterflooding development
注水开发
1.
Pilot study on waterflooding development in multi-well fracture-cavity units of Tahe Oilfield;
塔河油田多井缝洞单元注水开发试验研究
2.
The mass began to develop in 1999, and diverted to waterflooding development in 2000, cumulative injection of 110000 cubic meter water by now.
该块 1 999年投入开发 ,2 0 0 0年转为注水开发 ,累计注水达 1 1万立方米 ,但是对应油井没有见到相应的注水效果 ,鉴于这种情况 ,本文着重从静态、动态、压力、油水边界、井间地震解释结果等方面来研究了该块的油藏地质特征 ,证明了该块主要存在物性过渡带 ,其次断层有一定的影响 ,从而为下步开发方案的制定打下了坚实的基础。
3.
Low permeability reservoir bed has a large seepage resistance force to the flow of fluids in it, and reservoir bed fluids can flow only when a pressure is above certain pressure which is called startup pressure,which acts on it, so waterflooding development of low permeability reservoir is hard.
低渗透储层由于渗流阻力大存在启动压差 ,注水开发难度较大 ;非均质储层由于层间、平面渗流能力差异大导致储量动用程度差异大 ;渤海湾盆地异常高压油藏一般属欠压实型 ,投入开发后地层压力下降导致储层孔渗降低且部分不可逆 ,影响开发效果 ;深层油藏压力温度高 ,对工艺技术要求高。
5) water flooding development
注水开发
1.
The statistics show that the electric power consumption in water flooding development takes up 33%~56% in the total power consumption of oil production.
据统计,注水开发油田的注水电耗占原油生产总用电的33%~56%,注水节能成为一个迫切需要解决的问题。
2.
On the basis of experiment, the article discusses such reservoir characteristics of S3 in East Block of Wen 13 and effects on water flooding development as follows:By conventional analysis technique such as thin-section analysis, lithology and petrological property are reveled.
本文从实验数据出发,分别论述了文东油田文13东块沙三中储层多方面的特征及其对注水开发的影响,主要内容有: 通过薄片、铸体等常规分析技术,揭示储层岩石学特征、岩石物性分布特征,研究成岩作用类型,划分成岩阶段和成岩相。
6) flood development
注水开发
1.
Both old oilfield coring data in high water cut stage and mines dynamic logging data show that reservoir permeability, crude oil viscosity and rock wettability have changed greatly after long-term flood development compared with the early.
老油田高含水期取心资料和矿场测井动态资料表明,储层渗透率、原油粘度和岩石润湿性等物性参数随注水开发发生连续变化。
2.
During the flood development of oil field, reservoir physical characteristics have been continuously changed following the water that has been injected.
油田在注水开发过程中,储层的物理特征参数随注入水冲刷而不断发生变化。
补充资料：Pro/E二次开发使用toolkit开发trigger的程序
使用toolkit开发trigger的程序时,往往需要能够连续通过trigger来触发dll中的函数.
我碰到的问题:
1.配置trigger:
Name: CimDll
Event: Create PIV
Time: POST
RequireNO
DLL:Cim.dll
Function:PDMTPIVCreatePostOperation
2.源代码:
int PDMDLLInit()
{
PTCERROR pdm_status;
FILE *g_pfileLog;
g_pfileLog =fopen("test.dat","w");
setbuf(g_pfileLog,NULL);
fprintf(g_pfileLog,"begin test\n");
pdm_status = PDMTriggerRegister("PDMTPIVCreatePostOperation", PDMTPIVCreatePostOperation);
if (pdm_status != PDM_SUCCESS)
{
printf("Failed to Register Trigger PIV Create Post.\n");
}
return (pdm_status);
} int PDMTPIVCreatePostOperation(int argc, void **argv)
{
fprintf(g_pfileLog,"test\n");
.....
fprintf(g_pfileLog,"end test\n");
fclose(g_pfileLog); } 结果:以上代码存在的问题:如果我们在第一次checkin到C/S中后,删除test.dat文件,然后再进行checkin时,发现没有再生成test.dat,在函数PDMTPIVCreatePostOperation()中所进行的对文件的操作都无效.
原因:我们使用trigger触发时,真正起作用的是函数:PDMTPIVCreatePostOperation(),而PDMDLLInit()只是在第一次checkin时起作用,所以在第一次调用PDMTPIVCreatePostOperation()后,我就fclose(g_pfileLog),所以出现了上面的情况.所以注意的是:不要把一些重要的东西放在函数PDMDLLInit()中.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|