1) As-cast Microstructure
铸态显微组织
1.
As-cast Microstructure of Mg-5Sn-xGd Alloys;
Mg-5Sn-xGd合金的铸态显微组织
2) as-cast microstructure
铸态组织
1.
Morphology and Phase Constituent of Secondary Phase in As-cast Microstructure of 7150 Aluminum Alloy;
7150铝合金铸态组织中第二相的形貌及相组成
2.
Effects of Trace Si,Ba and Sn on the As-cast Microstructure of AZ91 Magnesium Alloy;
微量Si、Ba、Sn对AZ91铸态组织的影响
3.
Effect of lithium on as-cast microstructure of Mg-2Al-1Zn-4Y-3Nd alloy;
Li含量对Mg-2Al-1Zn-4Y-3Nd合金铸态组织的影响
3) As-cast structure
铸态组织
1.
On the basis of twin-roll thin strip continuous casting experiments, structure and composition analysis, the as-cast structure characteristics of 1Cr18Ni9Ti stainless steel twin-roll thin strip were investigated.
通过双辊薄带连铸试验和组织成分分析,对1Cr18Ni9Ti不锈钢双辊薄带的铸态组织特征进行了研究。
2.
The effect of yttrium on as-cast structure and age hardening of the magnesium alloy Mg-9Al-1Zn were investigated.
研究了稀土元素钇 (Y)对Mg 9Al 1Zn合金铸态组织及时效硬化特性的影响。
3.
The investigation was carried out experimentally on as-cast structure evolution of horizontal continuous casting aluminum alloy under combination electromagnetic field.
采用试验的方法研究了组合磁场作用下5182铝合金水平连铸过程中铸态组织的演变。
4) cast microstructure
铸态组织
1.
Effect of N on in-cast microstructure and mechanical properties of Ti-6Al alloys;
氮对Ti-6Al合金的铸态组织与性能的影响
2.
As-cast microstructure and mechanical properties of Ti-N alloys;
钛氮合金的铸态组织与性能
5) cast structure
铸态组织
1.
The cast structures and component of vacuum melten and rapid solidified Cu-15Ni-8Sn alloys without Si or with different addition levels of Si (0.
2%)的Cu-15Ni-8Sn合金的铸态组织形貌及构成进行了研究。
2.
The cast structure and component segregation were studied in Cu 15Ni 8Sn with addition of Si by optical microscope, SEM and energy spectrum analysis.
用金相、扫描电镜及电子能谱微区成分分析等方法对添加少量Si的Cu 15Ni 8Sn合金的铸态组织结构及成分偏析进行了研究。
3.
50 %, mass %) of mischmetal on cast structure and hardness of Al 7Si 4Cu alloy is studied by using metallographic analysis,electronmicroscope and thermal analysis.
５０％，质量分数）对Ａｌ－７Ｓｉ－４Ｃｕ合金铸态组织与硬度的影响。
6) casting microstructure
铸态组织
1.
The experiment results show that the addition of trace erbium will remarkably refine casting microstructure of LF 3 Al alloy, the grain refinement results in decreased branching of the dendrites and the eutectic compound, make the secondary phase more miner and the phase distribute dispersively, and it can produce a rare earth compound of Al .
结果表明 :微量铒的加入可显著细化LF3铝合金的铸态组织 ,使其枝晶网胞尺寸明显减小 ,网胞间共晶化合物也更稀薄 ;同时 ,使第二相化合物更细小 ,分布也更均匀 ;微量铒的加入可形成Al3Er稀土化合物 ,没有发现粗大的块状化合物。
2.
The results show that in caseof centrifugal casting the casting microstructures are mainly consisted of martensite + M7C3 carbides + residual austenite+ M23C6 carbides,and relates to factual cooling rates.
对20Cr高铬铸铁离心铸造后的铸态组织进行了观察。
3.
Pure rare earth elements, lanthanum and cerium, are added to pure copper, then the inner mechanism and influence of rare earth addition on its absorptivity in copper casting microstructure specific resistance and mechanical properties are studied in this paper.
在纯铜中加入纯稀土元素La、Ce，研究稀土元素在纯铜中的作用机理、吸收率的影响因素以及稀土元素对铸态组织、导电性、力学性能的影响。
补充资料：显微组织
microstructure：金属和合金的金相磨面经过适当的显露（例如蚀刻）后借助于显微镜所观察到的组织。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条