1) differential scanning calorimetry
DSC
1.
The thermal analysis kinetics of AgGaS2 crystal was studied by differential scanning calorimetry(DSC).
采用动态多重扫描速率法测试了AgGaS2在三个不同升温速率5K/min、10K/min和15K/min下的DSC曲线,得到一系列动力学参数。
2.
With such advanced methods as infrared spectroscopy, X ray diffraction, differential scanning calorimetry and electron microscope scanning, it is tested the tussah silk powder prepared by machinical methods or hydrolyzed with hydrochloric or sulfuric acids.
利用红外光谱、X 射线衍射、DSC分析、电镜扫描等先进测试手段对经机械法和酸水解法制备的柞蚕丝粉进行测试 ,分析不同制备方法对其结晶度、热性能、微观形态、水溶性和吸湿率等理化性能变化的影
3.
Application of differential scanning calorimetry (DSC) to analysis of composition, selection of ingredients and evaluation of quality etc of the compounds were related.
叙述了差示扫描量热仪 (DSC)在橡胶组分分析 ,橡胶配合剂的选择 ,橡胶的质量评价等橡胶配方研究中的应
2) Differential scanning calorimeter
DSC
1.
The undercoolings of Ni-coating melt with different temperatures were in situ tested within differential scanning calorimeter facility by a fiux technique.
将DSC技术与助熔剂(BaCl2)处理技术相结合,在不同温度下原位测试了Ni镀层熔体的过冷度。
2.
Amorphous ribbons of Mg_(80-x)Cu_(10+x)Y_(10)(x=0,5,10,15) are prepared by melt spinning process and the amorphous structure is testified by X-ray diffraction analysis and differential scanning calorimeter analysis.
利用单辊甩带法制备了Mg80-xCu10+xY10(x=0,5,10,15)非晶态合金薄带,用XRD分析和DSC分析显示薄带形成了非晶态结构。
3.
L?1 LiPF6 electrolyte at elevated temperature for lithium ion batteries were studied with differential scanning calorimeter(DSC) and X-ray diffraction(XRD).
采用DSC和XRD方法研究了1 mol。
3) DSC method
DSC法
1.
The DSC method was accurate and convenient.
比较了4种评价PVC-U塑化度的方法:目测法简单;溶剂法迅速,容易操作;拉伸法可定量判断,但需要大量样品;DSC法准确、方便。
4) DSC
DSC法
1.
The DSC Means for the Stabilization of Martensite in Cu-Zn-Al Alloy;
用DSC法研究Cu-Zn-Al合金马氏体的稳定化问题
2.
DETERMINATION OF CURE REACATION TEMPERATURE AND REACTION HEAT FOR EPOXY RESINS BY DSC;
DSC法测定环氧树脂固化反应温度和反应热
3.
Study with DSC on the Curing of Cycloaliphatic Epoxy/Onium Salt with UV or Heat;
DSC法研究脂环族环氧/硫鎓盐体系的UV及热固化过程
5) photo-DSC (DPC) technique
光DSC
6) DSC DTA
DSC-DTA
补充资料：DSC
分子式：
分子量：
CAS号：
性质：一种热分析法。在程序控制温度下，测量输入到试样和参比物的功率差（如以热的形式）与温度的关系。差示扫描量热仪记录到的曲线称DSC曲线，它以样品吸热或放热的速率，即热流率dH/dt （单位毫焦/秒）为纵坐标，以温度T或时间t为横坐标，可以测定多种热力学和动力学参数，例如比热容、反应热、转变热、相图、反应速率、结晶速率、高聚物结晶度、样品纯度等。该法使用温度范围宽（-175~725℃）、分辨率高、试样用量少。适用于无机物、有机化合物及药物分析。
分子量：
CAS号：
性质：一种热分析法。在程序控制温度下，测量输入到试样和参比物的功率差（如以热的形式）与温度的关系。差示扫描量热仪记录到的曲线称DSC曲线，它以样品吸热或放热的速率，即热流率
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条