1) POE
POE
1.
Study of PP/Co-PP/POE Blend;
PP/共聚PP/POE共混体系的研究
2.
Study on Morphology of Disperse Phase and Properties of PA6/POE/POE-g-MAH;
PA6/POE/POE-g-MAH分散相态与性能研究
3.
The Performance of POE and Application in Modifying of Polypropylene;
POE的性能及在聚丙烯中的应用
2) POE
聚烯烃弹性体
1.
The HDPE film was modified by the addition of POE and CaCO_3 to improving its puncture strength.
采用聚烯烃弹性体(POE)和重质碳酸钙对HDPE薄膜进行改性,研究了POE和重质碳酸钙的用量对共混体系薄膜力学性能、流变性能的影响。
2.
The rheological properties of polyolefin elastomer(POE)/nano-calcium carbonate composite were experimentally investigated.
试验研究聚烯烃弹性体(POE)/纳米碳酸钙复合材料的流变性能。
3) POE
乙烯-辛烯共聚物
1.
The PP–POE–nano CaCO_3 ternary composites were prepared with POE as toughener,nano CaCO_3 as reinforcer.
以乙烯-辛烯共聚物(POE)为增韧剂,以纳米CaCO3为增强剂,将传统弹性体增韧方法与新型纳米粒子增韧增强手段相结合,利用双螺杆挤出机,通过熔融共混工艺制备出了共聚聚丙烯(PP)/POE/纳米CaCO3三元复合材料,研究了纳米CaCO3用量对复合材料的流动性和力学性能的影响,还利用扫描电子显微镜(SEM)对复合材料的断面形态进行了研究。
2.
For obtaining high grafting defree, solvothermal process was developed to graft maleic anhydride (MAH) onto poly(ethylene 1-octene) (POE).
首次尝试用溶剂热合成法制备马来酸酐(MAH)接枝乙烯-辛烯共聚物(POE)共聚物。
4) POE
乙烯-1-辛烯共聚物
1.
Application of infrared spectrum in study of graft copolyme POE-g-MAH;
红外光谱在马来酸酐接枝乙烯-1-辛烯共聚物研究中的应用
2.
It prepared glycidyl methacrylate (GMA) grafted ethylene-1-octene (POE) by means of melting method, and characterized its structure by making use of IR spectrum.
采用熔融法制备乙烯-1-辛烯共聚物(POE)接枝甲基丙烯酸环氧丙酯(GMA),利用红外光谱对其结构进行表征。
3.
The maleic anhydride(MAH) was employed as grafting monomer onto polyolefin(elastomer)(POE/PP) by reactive extrusion.
研究了在含有适量聚丙烯的聚烯烃弹性体乙烯-1-辛烯共聚物(POE)熔融接枝马来酸酐(MAH)反应中,引发剂、接枝单体用量、及阻交联剂品种对接枝率的影响及其微观机理。
5) POE
聚烯烃热塑性弹性体
1.
PP/POE blends were prepared by means of melt blending.
采用熔融共混工艺制备了聚丙烯(PP)/聚烯烃热塑性弹性体(POE)共混物,用动态力学试验方法研究了PP/POE材料的动态力学特征。
2.
PP/POE/Nano-meter CaCO 3 composites were prepared by melt-blending.
采用熔融共混工艺制备了聚丙烯 (PP) /聚烯烃热塑性弹性体 (POE) /纳米CaCO3 复合材料。
3.
POE was employed for toughening PP and inorganic fillers were added simultaneously,some organic and inorganic light ,heat stabilizers were also employed for improving the weatherproof property of PP.
采用聚烯烃热塑性弹性体 (POE)增韧聚丙烯 (PP) ,同时加入无机填料进行填充 ;并加入有机和无机光、热稳定剂增加PP的耐候性。
6) POE
乙烯与α-辛烯共聚物弹性体
参考词条
补充资料：POE
分子式：
CAS号：
性质：共聚单体含量高，产品呈现弹性体特征的烯烃共聚物。包括乙丙共聚物，乙烯-丙烯-丁二烯共聚物，丙烯-乙烯-1-丁烯多元共聚物，乙烯-辛烯共聚物等。有的已属于热塑性弹性体范畴。以Dow公司牌号为“Engage”之乙烯-辛烯共聚物为例。1-辛烯含量>20％。100％定伸模量为1.0～5.2MPa，伸长率>700％。压缩永久变形率25％～50％，门尼黏度5～35。交联性好。用茂金属催化剂由乙烯和辛烯共聚而得，可用作交联低压电缆、汽车零件、密封件，也可作为聚烯烃改性剂。
CAS号：
性质：共聚单体含量高，产品呈现弹性体特征的烯烃共聚物。包括乙丙共聚物，乙烯-丙烯-丁二烯共聚物，丙烯-乙烯-1-丁烯多元共聚物，乙烯-辛烯共聚物等。有的已属于热塑性弹性体范畴。以Dow公司牌号为“Engage”之乙烯-辛烯共聚物为例。1-辛烯含量>20％。100％定伸模量为1.0～5.2MPa，伸长率>700％。压缩永久变形率25％～50％，门尼黏度5～35。交联性好。用茂金属催化剂由乙烯和辛烯共聚而得，可用作交联低压电缆、汽车零件、密封件，也可作为聚烯烃改性剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。