1) mandrel
[英]['mændrəl] [美]['mændrəl]
芯棒
1.
Modifications of Mandrel Cooling System and Outlet Table of Assel Pipe Mill;
Assel轧管机芯棒冷却及后台设备的改造
2.
Discussion on Optimizing Deformation Process to Enhance Mandrel Utilization Factor;
优化变形工艺提高芯棒利用效率的探讨
3.
3D finite element analysis of effect of mandrel on continuous seamless tube rolling process;
芯棒对连轧管轧制过程影响的三维有限元分析
2) core
[英][kɔ:(r)] [美][kɔr]
芯棒
1.
Through tests of ACCC under different high temperature conditions,it is found that under high temperature,the surface of carbon fiber composite core of strain jumper section will appear something like "bamboo knots",which requires special attention in design.
但也有其自身的弱点,通过对ACCC导线进行不同状态的耐高温性能试验,发现该导线耐张跳线段的碳纤维复合芯棒表面高温运行时会出现"竹节"现象,在设计中应予特别关注。
2.
The effect of pressing procedure on mechanical property was investigated with different core,stress and production procedure.
介绍了国内外棒形悬式复合绝缘子金属附件连接区的设计结构,从不同厂家芯棒、压接力和生产工序三方面研究了连接区采用压接式结构对产品机械性能的影响,提出了在设计连接区时应考虑圆度、连接区的长度、端口的密封性、压块的长度及壁厚等因素。
3) Core rod
芯棒
1.
Cause study and countermeasures for core rod brittle fracture of suspension composite insulators on 220kV Ping-He line;
220kV坪核线复合绝缘子芯棒脆断原因分析及对策
2.
By analyzing the damage of the core rod and the sheath,the causations of the fault are analyzed.
介绍了500kV北增甲线59号塔L2相双V形复合绝缘子串断裂的故障情况,通过分析芯棒和护套的受损形貌,指出故障形成的主要原因是复合绝缘子受到局部放电腐蚀和化学腐蚀而使机械强度降低,次要原因是均压环结构设计不合理。
4) retained mandrel
限动芯棒
1.
Production practice of applying DRI in steelmaking for retained mandrel steel;
直接还原铁在限动芯棒钢冶炼中的生产实践
2.
Discussion on the design method of diameters of series of mandrels of retained mandrel mill;
限动芯棒连轧管机芯棒直径系列的设计方法
3.
The quality of seamless tube can be improved greatly by using retained mandrel mill with on line inspection This paper summarizes the practice of retained mandrel mill at TPCO (Tianjin Pipe Corp ), and a detailed analysis of technical difficulties and major product defects were given with proposed the precaution measure
采用限动芯棒连轧工艺生产无缝钢管，再加上先进的在线检测技术，使得无缝钢管产品的质量有了可靠的保证。
5) H13 steel core bar
H13钢芯棒
1.
After quenching and tempering, material H13 steel core bar was broken during alignment There are naphthalene fractures on macroscopical fractures surface.
H13钢芯棒毛坯在调质热处理后的校正工序中发生断裂,宏观断裂面出现萘状断口。
6) integral core rod
整体芯棒
1.
An integral core rod, a round-hole diffluent bracket and an extrusion head with double tubes to the extrusion head were applied in extrusion head designing,and the designing process of the ex-trusion head was introduced in detail.
3 mm的医用微细介入导管,设计了一种专用微管挤出机头,其特点是采用了整体芯棒、圆孔分流支架和双管机头结构,详细介绍了该挤出机头的设计过程。
补充资料：芯棒
芯棒
mandrel
x inbang芯棒(mandrel)生产无缝管时插进管体内部同乳辐等构成环形孔型使管材成形用的工具。连续札管机轧管、管材针轧延伸、周期式轧管机乳管、顶管和管材冷乳冷拔时都要使用芯棒。 芯棒是一根很长的圆棒和顶头一样在变形区内参与管材的变形，不同的是针乳时芯棒在管内随着管材边旋转边做轴向运动;纵札(连轧管、周期式轧管、顶管)时芯棒不旋转但也随管做轴向运动。 在浮动芯棒和限动芯棒连轧管机上(见连续乳管机札管)，芯棒是重要的工具，它们除了要求用高强度和高耐磨性的材质制做外，还要求很高的表面质量，如车削后要经研磨和热处理。浮动芯棒很长(达30m)很重(达12t)。限动芯棒的长度稍短，但对材质要求更高。顶管对使用的芯棒应能承受很大的顶推力。周期式轧管机的芯律工作时受热时间长。斜轧延伸机的芯棒有拉力芯棒、浮动芯棒、限动芯棒和回退式芯棒等。 拉力芯棒是工作时轴向运动速度大于管子轴向运动速度的芯棒(见管材针轧延伸)，芯棒对管子内表面_施加拉力。回退式芯棒是芯棒轴向运动方向与管子轴向运动方向相反，施加后拉力的芯棒。斜轧延伸机对芯棒的要求比纵轧延伸机的要低。 (李连诗)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条