1) grinding heat
磨削热
1.
The grinding heat is the important factor to influence greatly on the ground surface quality when the forfex is machined with gringing wheels.
砂轮磨削刀剪材料的过程中产生的磨削热是影响刀剪表面质量的重要因素。
2.
It was found that the grinding process was unsuitable,thus too much grinding heat was produced and near surface zone of the cam shaft was overtempered,which resulted in very high residual tensile stress and drop in hardness in this zone.
认为磨削工艺不当，产生了过高的磨削热，使凸轮浅表层组织回火过度，硬度大幅下降，从而产生极大的拉应力是磨削裂纹产生的主要原因。
3.
Grind-hardening is a new technology which utilizes grinding heat to induce martensitic phase transformation and strengthen workpiece surface in gringding process by raising surface temperature above Ac3 instantaneously and cooling quickly.
磨削表面强化技术利用磨削过程中生成的磨削热使工件表层温度瞬间升高到Ac3以上,然后迅速冷却,以使表层材料马氏体化。
2) grinding thermal
磨削热
1.
This paper explained the reasons of the cracks by analyzing grinding thermal,grinding farce and the stress of the gear surface in the grinding process and the microstructure of the carburizing quench before the grinding process,and put forward measures like improving the grinding process to lower the grinding temperature,treating the quench to improve the state of the gear surface stress,etc.
从磨削过程中磨削热、磨削力、齿面应力状态及磨削之前的渗碳淬火工序所得的显微组织等方面,阐述裂纹产生的原因,并提出从磨削工艺上降低磨削温度、从淬火处理上改善齿轮表面应力状态等措施,可有效控制和防止该齿轮的磨削裂纹的产生。
3) Grinding superheat
磨削过热
5) grinding
[英]['ɡraɪndɪŋ] [美]['graɪndɪŋ]
磨削
1.
CBN wheel grinding on the rollers skew tooth top-surface of drawing frames draft;
并条机牵伸罗拉斜齿顶面CBN砂轮磨削加工
2.
Study of Grinding Cracks and the flexural strength of Ground Brittle Materials;
脆性材料磨削加工损伤及工件强度研究
3.
Automatic Reverse Devices for Grinding the Raised Key Axis;
磨削凸键轴的自动换向装置
6) grind
[英][ɡraɪnd] [美][graɪnd]
磨削
1.
The advance of grinding with high rate and high precision;
采用高速高精度磨削的优点
2.
Application of CAN bus in five-axis embedded grinding CNC system;
CAN总线在五轴嵌入式数控磨削系统中的应用
3.
Optimization for command of CNC camshaft grinding;
数控凸轮轴磨削指令曲线的优化
补充资料：负温度系数热敏电阻陶瓷(见热敏陶瓷)
负温度系数热敏电阻陶瓷(见热敏陶瓷)
thermo-sensitive ceramics with negative temperature coefficient
负温度系数热敏电阻陶瓷thermo一sensitiveeeramies with negative temperature eoeffieient在某一特定温度范围，电阻率随温度的升高而明显减小的热敏陶瓷。简称NTC陶瓷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条