1) swelling balance
溶胀平衡
1.
Based on the Flory-Huggins model and Wilson equation, the swelling balance mathematical model of the pervaporation process of isopropanol/water mixtures using polyvinyl alcohol(PVA) membrane was established.
根据Flory-Huggins模型和Wilson方程,建立了聚乙烯醇(PVA)膜渗透汽化分离异丙醇水溶液过程的溶胀平衡数学模型,模型计算值与实验值吻合良好。
2.
Shengli coal and Shenhua coal took about 35 min reach to swelling balance,and H coal took only 20 min.
胜利煤和神华煤约35 min达到溶胀平衡,H煤约20 min即达到溶胀平衡。
2) swelling equilibrium
溶胀平衡
1.
The swelling equilibrium for the system water－ethylene glycol-crosslinked PVA at various temperatures were experimentally investigated.
对交联聚乙烯醇均质膜于全浓度范围的乙二醇／水溶液中分别在60、70和80℃下进行了溶胀平衡实验研究。
3) equilibrium swelling
平衡溶胀
1.
Vulcanizates' gel content, equilibrium swelling ratio, high temperature modulus and crosslinking densities were measured.
通过凝胶含量、平衡溶胀比和高温模量等的测定 ,比较了过氧化物交联 LDPE和硅烷交联 LDPE的结构与性能的差异。
4) equilibrium swelling method
平衡溶胀法
1.
The influences of amount of sulfur and curing temperature on the network structure of natural rubber(NR) were characterized by nuclear magnetic resonance(NMR) spectroscopy,and the results were compared with those got from equilibrium swelling method.
用核磁共振(NMR)法测定了硫黄用量及硫化温度对天然橡胶(NR)硫化胶交联结构的影响,并与传统的平衡溶胀法进行了对比。
2.
The solubility parameter of methyl vinylsilicone rubber(MVQ) was determined with the equilibrium swelling method and the viscosity method respectively.
采用平衡溶胀法和粘度法分别测定了甲基乙烯基硅橡胶（ＭＶＱ）的溶解度参数。
5) degree of equilibrium swelling
平衡溶胀度
1.
The effects of various factors such as preparation conditions and solvent properties on the degree of equilibrium swelling were investigated.
以壳聚糖、丙烯酸、甲基丙烯酸羟乙酯为原料,硝酸铈铵、过氧化二苯甲酰为引发剂,戊二醛为交联剂,制备了壳聚糖-丙烯酸-甲基丙烯酸羟乙酯复合水凝胶,探讨了凝胶溶胀过程和理论,研究了凝胶合成条件及溶剂性质对凝胶平衡溶胀度的影响。
6) equilibrium swelling ratio
平衡溶胀比
1.
The swelling kinetics was discussed, and the effects of the reaction conditions, including the amounts of starch, monomers, initiator and crosslinker, on the equilibrium swelling ratio of the hydrogels were investigated.
以硝酸铈铵(CAN)为引发剂、N,N′＿亚甲基双丙烯酰胺(BIS)为交联剂,在水溶液中合成了可生物降解淀粉 聚(丙烯酰胺＿co＿乙烯基吡咯烷酮)杂混水凝胶;探讨了有关溶胀动力学,着重考察了合成反应条件包括淀粉用量、单体浓度、引发剂和交联剂用量对凝胶平衡溶胀比的影响。
2.
The viscosity of prepolymer, together with number average molecular weight, equilibrium swelling ratio Q and UV cured mechanical properties were measured, and, the relations between chain structure and microphase separation were studied.
通过对一系列具有不同分子结构的丙烯酸聚氨酯光敏预聚体的粘度、数均分子量、自动氧化反应以及光固化后树脂的平衡溶胀比和力学性能的测定 ,探讨了这类丙烯酸聚氨酯光敏树脂的链结构与微相分离、光固化性能以及力学性能间的关系 。
补充资料：溶胀
分子式：
CAS号：
性质：凝胶吸收液体或蒸气使自身重量与体积增大的作用。溶胀作用是弹性凝胶特有的性质。在一定条件下，单位重量或单位体积凝胶所吸收的液体极限量与凝胶量的比值称为溶胀度，其定义为S=（m2-m1）/m1或S=(V2-V1)/V1上式中，m2与V2分别为溶胀后凝胶的重量与体积，m1与V1分别为溶胀前凝胶的重量与体积，S即为溶胀度（degree of swelling）。
CAS号：
性质：凝胶吸收液体或蒸气使自身重量与体积增大的作用。溶胀作用是弹性凝胶特有的性质。在一定条件下，单位重量或单位体积凝胶所吸收的液体极限量与凝胶量的比值称为溶胀度，其定义为S=（m2-m1）/m1或S=(V2-V1)/V1上式中，m2与V2分别为溶胀后凝胶的重量与体积，m1与V1分别为溶胀前凝胶的重量与体积，S即为溶胀度（degree of swelling）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条