1) turbogenerator
['tə:bəu'dʒenəreitə]
汽轮发电机
1.
Finite-Element Analysis on Electromagnetic Field of Turbogenerator at Load and Disturbed Harmonic;
汽轮发电机负载及谐波扰动时电磁场有限元分析
2.
Analysis on magnetic field and fault of interturn shortcircuit in rotor windings of turbogenerator;
汽轮发电机转子绕组匝间短路的故障原因与磁场分析
3.
Protective control for turbogenerator with DCS;
应用DCS实现汽轮发电机的保护控制
2) turbo-generator
汽轮发电机
1.
Vibration analysis for a large capacity turbo-generator stator main lead;
大型汽轮发电机定子引线振动分析
2.
Simulation of 3D temperature distribution of immersion evaporative cooling turbo-generator combined with forced inner cooling system;
浸润式混合强迫内冷的蒸发冷却汽轮发电机定子三维温度场的仿真分析
3.
Development of hydrogen desiccator of turbo-generator;
汽轮发电机氢气干燥器的发展概况
3) turbine generator
汽轮发电机
1.
Application of CAE in Analysis of Large Turbine Generator;
CAE在大型汽轮发电机设计研究中的应用
2.
Analysis and prevention of inner-cooled water system failure on parallel rings and main leads in large turbine generator;
大型汽轮发电机并联环和主引线水路故障分析和预防
3.
Nonlinear optimal predictive controller for main steam valve of turbine generator;
汽轮发电机主汽门开度的非线性最优预测控制
4) turbine-generator
汽轮发电机
1.
Simulation of dynamic processes for hydro-generator and turbine-generator under loss of excitation and self-excitation;
水轮发电机和汽轮发电机失磁和自励磁仿真
2.
Vibration Experiment on 650MW Turbine-generator Stator;
核电650MW汽轮发电机定子振动性能试验
3.
Capacity-expansion retrofitting of small-size turbine-generator set in a sulphuric acid plant;
硫酸装置小型汽轮发电机组的扩容改造
5) Turbo generator
汽轮发电机
1.
Analysis of measuring error for the alignment of turbo generator rotor;
汽轮发电机转子中心测量中的误差分析
2.
Experimental research of open channel evaporative cooling of turbo generator s rotor windings;
汽轮发电机转子绕组开放管道式蒸发冷却技术的实验研究
3.
Analysis of the turn-to-turn short circuit of turbo generator rotor windings and its treatment;
汽轮发电机转子匝间短路的分析及处理
6) steam turbine generator
汽轮发电机
1.
Analysis on vibrating causes of steam turbine generator;
汽轮发电机振动原因分析
2.
Finally,a fault diagnosis method for rotor of steam turbine generators was proposed,which is with the fault diagnosis system that was designed with Microsoft Visual C++ and MATCOM as well as based on shaft voltage.
汽轮发电机组在向高效率、高可控性、高可靠性和低维修率方向发展,轴电压在电机运行过程中应当引起足够的重视。
3.
To the problem of failure diagnosis of steam turbine generator set,principle and existing defects of genetic algorithm and BP network are analyzed.
针对汽轮发电机组的振动故障诊断的特点,分析了BP网络和遗传算法原理和缺陷。
补充资料：汽轮发电机
用汽轮机驱动的发电机。由锅炉产生的过热蒸汽进入汽轮机内膨胀做功，使叶片转动而带动发电机发电，做功后的废汽经凝汽器、循环水泵、凝结水泵、给水加热装置等送回锅炉循环使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条