1) welded joint
焊接头
1.
Together with the reason of lower strength and fracture toughness were investigated in the soldering seam zone of the flash welded joint.
对焊接接头的组织和性能进行了对比分析,进而研究了闪光焊接头焊缝区强韧性损伤的机理;阐述了摩擦焊的优越性及接头形成机制,并提供了摩擦焊接头较佳的焊接参数。
2) welded joints
焊接接头
1.
Fatigue properties of welded joints of 16Mn steel in super long life region;
超长寿命区间16Mn钢焊接接头疲劳性能
2.
CTOD fracture toughness test for super-thick welded joints of D36 offshore platform steel;
海洋平台用钢D36超大厚度焊接接头CTOD试验
3.
Experiment on dressing for improving fatigue strengths of welded joints with low transformation temperature electrode;
利用低相变点焊条熔修方法改善焊接接头疲劳强度的试验
3) welded joint
焊接接头
1.
Low temperature toughness of ultra low-carbon 9Ni steel welded joints;
超低碳9Ni钢焊接接头低温韧性
2.
Development of feature database of welded joint for the oil box based on Msc.Marc;
基于Msc. Marc的油箱结构焊接接头特征库开发
3.
Effect of heat treatment with protective coating on microstructure of D406A steel welded joint;
热处理保护涂料对D406A钢焊接接头显微组织的影响
4) weld joint
焊接接头
1.
Microstructure and properties of Al-Mg-Sc alloy weld joints filled with Al-Mg-Zr and Al-Mg-Zr-Sc weld wires;
含钪与不含钪铝镁钪合金焊接接头的组织与性能
2.
Stress corrosion cracking of weld joint of pipeline steel X70 in near-neutral solution;
X70钢焊接接头在近中性溶液中应力腐蚀行为研究
3.
Fatigue performance of weld joint for high strength bridge steel
高强度桥梁钢焊接接头疲劳性能的研究
5) welding joint
焊接接头
1.
Improving quality of Ti6Al4V welding joint by arc-excited ultrasonic treatment;
电弧超声改善Ti6Al4V焊接接头性能的研究
2.
Performance of the steel plate and welding joint for 10×10~4 m~3 oil storage tank;
10×10~4m~3原油储罐用钢板及其焊接接头性能
6) welding joints
焊接接头
1.
Study on anti-erosion performance of welding joints of1Cr18Ni9Ti or 1Cr18Ni9Ti with16MnDR;
1Cr18Ni9Ti同种金属及其与16MnDR异种金属焊接接头抗腐蚀研究
2.
Weldability and welding joints' corrosion resistance of high strength pipeline steels;
高强管线钢的焊接性及其焊接接头的耐腐蚀性
3.
The domestic X70 pipeline steel welding joints were tested by slow strain rate test,and the effect on welding joints of each factors were studied.
运用均匀设计方法,通过改变H2S溶液质量分数、Cl-质量分数、pH值和温度等溶液介质参数,对国产X70管线钢焊接接头在H2S溶液中进行慢应变速率拉伸应力腐蚀试验,分析介质参数对X70管线钢焊接接头腐蚀开裂的影响规律;通过扫描电子显微镜观察焊接接头试样断口的微观形貌,确定焊接接头应力腐蚀敏感性,得到H2S应力腐蚀导致X70管线钢焊接接头失效机理,并根据试验结果计算在各试验环境下的应力腐蚀敏感性指数。
补充资料：焊接式平封头
分子式：
CAS号：
性质：又称焊接式平盖。此类封头一般均采用大型锻件加工制造成的，显得比较笨重，采取以焊接方式与筒体相连接的称为焊接固定式平封头。由于平封头受力状态不好在大直径高压容器上很少采用，一般用作中、低压容器的平封头和小直径高压容器的端盖。
CAS号：
性质：又称焊接式平盖。此类封头一般均采用大型锻件加工制造成的，显得比较笨重，采取以焊接方式与筒体相连接的称为焊接固定式平封头。由于平封头受力状态不好在大直径高压容器上很少采用，一般用作中、低压容器的平封头和小直径高压容器的端盖。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条