1) wetting angle
润湿角
1.
A method for measuring wetting angle of solder;
一种软钎焊料润湿角的测量方法
2.
Surface tension and wetting angle measuring by suspending drops;
悬垂液滴研究及表面张力和润湿角测定
3.
By adjusting the basicity and the content of MgO,CaF2 or FeO of binding phase,the melting characteristics and wetting angles of different binding phase to Fe3O4 were investigated.
研究结果表明:碱度变大,MgO含量增加使粘结相的熔化温度升高,润湿角增大;CaF2和FeO能降低粘结相的熔化温度和润湿角。
2) contact angle
润湿角
1.
The adsorption behavior of dodecylamine on carbon steel surface and its inhibition mechanism in hydrochloric acid solutions were studied by electrochemical methods,atomic force microscopy and contact angle measurements.
利用原子力显微镜(AFM)、动电位扫描及润湿角测量等手段研究了盐酸溶液中十二胺在碳钢表面的吸附行为及其对碳钢腐蚀行为的影响。
2.
In this paper,three types of wettability evaluation methods,namely wetted spreading area test,wetting force test and contact angle test,have been used to measure the wettability of Sn-37Pb using different fluxes which include different concentration of the rosin.
分别用3种润湿性测量方法(铺展面积测量法、润湿力测量法和润湿角测量法)做了不同松香浓度和不同助焊剂下的钎料Sn-37Pb的润湿性,以及在不同助焊剂下润湿性。
3.
Owing to the fact that Mg can volatilize on the liquid droplet surface and destroy the new aluminium oxide on droplet surface, adding Mg in aluminium can reduce the contact angle of aluminium on fly ash and improve the wettability.
用改进的座滴法测量了铝合金在粉煤灰上的润湿角。
3) contact angle of water
水润湿角
1.
SiO 2/TiO 2 superhydrophilic coating on glazed tile substrate was prepared by solgel method,the surface chemical composition,contact angle of water and photographs of surface of the coating were studied by use of XPS,photomicroscopy and SEM.
用溶胶 -凝胶方法在釉面砖上制备了SiO2 /TiO2 超亲水涂层 ,用XPS、光学显微镜和SEM研究了涂层的表面化学组成、水润湿角和表面形貌。
4) angle of wetting
湿润角
5) Wetting angle factor
润湿角因子
6) wetting contact angle
润湿接触角
1.
The effect of surface modification on the particle size and particle size distribution was studied,the agglomeration and microstructure of the unmodified and modified powder were measured by SEM,the sedimentation times and wetting contact angles with different content modifying reagent were tested.
研究了表面改性对粉末粒度和粒度分布的影响,利用SEM观察了表面改性前后粉末的团聚和微观形貌,测试了不同改性剂含量粉末的沉降时间和润湿接触角。
补充资料：润湿角
分子式：
CAS号：
性质：0～180 之间的接触角，液体切线与固体表面间的夹角用θ表示，它的角角越接近于0 ，润湿越好，越接近于180 ，越难润湿。
CAS号：
性质：0～180 之间的接触角，液体切线与固体表面间的夹角用θ表示，它的角角越接近于0 ，润湿越好，越接近于180 ，越难润湿。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条