1) walking beam furnace
步进梁式加热炉
1.
The characteristics,performance parameters and control system of walking beam furnace with regenerative burner were introduced.
介绍了本溪钢铁集团公司特钢厂蓄热式烧嘴步进梁式加热炉的特点、技术性能参数及对该炉的控制和管理情况,并介绍了蓄热式燃烧系统的主要特征。
2.
4 250 t/h walking beam furnace in Hot Rolling Plant, Benxi Iron and Steel Group Co.
论述了本钢 4号步进梁式加热炉汽化冷却装置的组成、基本原理、结构、达到的水平及应用效果。
3.
The paper approaches the model of following slab in walking beam furnace at the hot rolling mill of new steel & vanadium Ltd.
文章探讨了攀枝花新钢钒股份有限公司热轧板厂步进梁式加热炉板坯跟踪模型，建立此模型，有利于实现燃烧系统的自动控制，提高板坯加热质量。
2) walking beam heating furnace
步进梁式加热炉
1.
Author introduced furnace Construction Lining building and dry at a fire of walking beam heating furnace heats plate billet both up and down heating.
介绍了加热板坯用上下供热步进梁式加热炉炉型结构概况、炉衬施工及烘烤技术。
2.
The article discusses the characteristics of working beam heating furnace in broad and thick mill shop, and introduces the design circumstance of typical walking beam heating furnace.
文章论述了宽厚板轧机车间步进梁式加热炉的特点及发展趋势，并介绍了典型的步进梁式加热炉的设计情
3.
4 walking beam heating furnace in Wuhan Iron and Steel Company, the problems in the process of construction were analyzed, the removal boundary lines were generalized, and the issues during the installation process were discussed.
针对某钢铁公司3#、4#步进梁式加热炉节能改造工程,对施工过程中出现的问题进行分析,确定了改造工程中加热炉的设计拆除界线范围与实际施工拆除界线,对各种设备安装过程中出现的问题进行探讨。
3) walking beam reheating furnace
步进梁式加热炉
1.
Based on a walking beam reheating furnace,mathematical models of slab and hot skid were built in this paper.
以某钢厂的1座步进梁式加热炉为例,建立钢坯和垫块温度场的数学模型。
2.
This paper introduced the problem of walking beam reheating furnace Φ89 continuous mills Hengyang Valin Steeltube(group) Company Limited,and analyzed the cause.
介绍了衡阳华菱钢管有限公司Φ89连轧机组步进梁式加热炉存在的问题,并对其产生原因进行了分析,对燃烧系统的改造取得了良好的效
3.
In this paper, using mathematical model optimizing control on temperature setpoint of walking beam reheating furnace is put forward, an on line control mathematical model for billets thermal process and the ideal heat up curves are built.
针对步进梁式加热炉 ,提出对温度设定值采用数模优化控制 ,建立了钢坯热过程在线控制数学模型和理想加热曲线 ,以便精确控制钢坯出炉温度和温度均匀性 ,达到提高产量和节约能源的目
4) walking-beam reheating furnace
步进梁式加热炉
1.
Introduces the applications of regenerative combustion technology in designing the walking-beam reheating furnace for Yuzun high wire in Qinggang.
介绍了蓄热式燃烧技术在青钢钰尊高线步进梁式加热炉设计中的应用情况。
5) walking-beam furnace
步进梁式加热炉
1.
Based on energy saving and safety operation,the advantages of evaporation cooling used in a walking-beam furnace are expounded.
从节能和安全生产两方面出发,阐述了步进梁式加热炉采用汽化冷却的优势。
6) regenerative two-walking-beam furnace
双蓄热步进梁式加热炉
补充资料：步进梁式窑
分子式：
CAS号：
性质：由一组固定梁和一组步进移动梁作为坯体运载工具的隧道窑。梁本身为钢结构，其上铺有耐火砖，移动梁下部设有移动机构，使其作步进式移动，移动梁比固定梁略低，坯体或坯体的垫板放在固定梁上。移动时，坯体被移动梁由下向上抬起，向窑尾方向平移一步，移动梁由上向下降落，坯体又被放在固定梁上，已使坯体或垫板前进了一步。移动梁放下坯体后再退回原来位置。如此反复进行。其性能特点是传送制品平稳，提高了坯体人窑成品率，易与前后工序连成自动化生产流水线，但窑的密封比较困难，易漏气，热耗较推板窑大，造价也高。
CAS号：
性质：由一组固定梁和一组步进移动梁作为坯体运载工具的隧道窑。梁本身为钢结构，其上铺有耐火砖，移动梁下部设有移动机构，使其作步进式移动，移动梁比固定梁略低，坯体或坯体的垫板放在固定梁上。移动时，坯体被移动梁由下向上抬起，向窑尾方向平移一步，移动梁由上向下降落，坯体又被放在固定梁上，已使坯体或垫板前进了一步。移动梁放下坯体后再退回原来位置。如此反复进行。其性能特点是传送制品平稳，提高了坯体人窑成品率，易与前后工序连成自动化生产流水线，但窑的密封比较困难，易漏气，热耗较推板窑大，造价也高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条