1) iron-based
铁基
1.
Effect of sintering temperature on contexture and performance of iron-based P/M aircraft brake materials;
烧结温度对铁基粉末冶金航空刹车材料组织的影响
2.
The Oxidation of Phenol-Water Solution with Low Concentration Catalyzed by Iron-based Composite Oxides;
铁基复合氧化物催化氧化处理低浓度含酚水溶液的研究
3.
Research progress of iron-based electrode materials for lithium-ion battery;
锂离子蓄电池铁基电极材料研究进展
2) Fe-based
铁基
1.
Study on Electronic Transport Properties of Fe-based Bulk Amorphous Alloys;
铁基大块非晶的输运性质研究
2.
The progress in research and development of Fe-based bulk metallic glass (BMG) soft magnetic alloys first reported in 1995 was introduced.
总结了1995年首次报道铁基块体金属玻璃(BMG)软磁合金研发成功以来该类合金的研发进展概况;阐述了BMG形成条件,BMG合金系及制备方法,各种类型铁基BMG合金的成分、制备要点及磁性,初步探索了双相BMG合金,简要介绍了铁基块体纳米晶合金,并评价了铁基BMG软磁合金的优势、不足及应用前景。
3.
The effect of different sintering temperature on the microstructure,density and frictional wear property of the Fe-based powder metallurgy(P/M)brake materials of aircraft was studied.
研究了不同烧结温度(900,930,950,980,1020℃)对飞机铁基粉末冶金刹车材料材料显微组织、致密化和摩擦磨损性能的影响。
3) iron based
铁基
1.
Adhesion technology about certain sets of military product iron based brake material was researched.
针对铁基刹车材料结合性工艺的研究,制定了多阶段升温、保温,多阶段加压,提高单位烧结压力,并严格控制升温速率的烧结工艺,成功的解决了该产品结合性不合格的问题。
2.
This paper studies the effect of different starting materia l,copper and rare-earth assistant on the activity of iron based catalyst for High-Temperature Water-Gas Shift Reaction,and found the best prescription:Fe2O3 81%,Cr2O3 8%,CuO 8%,CeO2 3%.
本文研究了不同铁铬原料及铜和稀土助剂对铁基高温变换催化剂活性的影响,得出最佳的配方为Fe2O381%、Cr2O38%、CuO8%、CeO23%,在汽气比为0。
3.
The effects of the parameters in heat treatment, such as quenching temperature, quenching time and tempering temperature have been investigated systematically, on the mechanical properties and wear property of hot pressed iron based diamond segments and its bond matrices.
首次提出了在烧结型金刚石工具的制造中引入热处理的新工艺，并系统地研究了淬火温度、淬火时间及回火温度等热处理工艺参数对热压烧结型铁基金刚石圆盘锯节块及其胎体材料机械性能的影响，同时对经热处理的铁基金刚石圆盘锯节块在石材旺苍红上进行磨损试验研究。
4) iron-base
铁基
1.
Effect of alloy elements on properties of iron-base hardfacing alloy;
合金元素对铁基耐磨堆焊合金性能的影响
2.
The porous oiled iron-base materials were prepared by powder metallurgy method.
采用粉末冶金方法制备多孔含油铁基材料,在自制的HDM-10型端面摩擦磨损试验机上进行摩擦磨损试验,考察了含碳量及材料密度对含油铁基材料摩擦磨损性能的影响。
3.
The influence of the carbon amount and sulphidation on the fricton and wear of iron-base materials was investigated.
在HDM-10型端面摩擦磨损试验机上分别进行恒定载荷与变动载荷摩擦磨损试验,考察了含碳量及硫化处理对铁基粉末冶金材料摩擦磨损性能的影响。
5) ferrous metal matrix
铁基
1.
This technique of in situ according to the principle of thermodynamic equilibrium combines the reaction synthesis of reinforced particulates with the traditional casting process, but lack of other property studies about ferrous metal matrix com.
在铁基复合材料研究领域中对原位反应制备复合材料的工艺性能研究较多,该工艺是根据热力学平衡原理,将增强颗粒的反应合成与铸造合金的熔炼、成型等过程结合起来,制备出原位反应MMCs,而对原位反应制备的MMCs其他性能的报到不多。
6) ferroalloy
[英][,ferəuə'lɔi] [美][,fɛro'ælɔɪ]
铁基合金
1.
Application of digital technology to optical spectroscopic analysis of molybdenum in ferroalloy;
数字化技术在铁基合金钼元素可见发射光谱分析中的应用
2.
Digital visible spectroscopic analysis of nickel in ferroalloy;
数字化技术在铁基合金镍元素可见光谱分析中的应用
3.
Digital Visible Spectrum Analysis of Al in Ferroalloy;
铁基合金中铝元素可见光谱数字化分析技术
补充资料：GH130铁基高温合金组织
GH130铁基高温合金组织
GHl30铁基高温合叠(700。C保温20分钟)细织中的7’、TiC、Laves相
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条