1) Microperforated panel
微穿孔板
1.
Using transfer matrix method to analyze microperforated panel absorber s acoustic characteristic;
用传递矩阵法分析微穿孔板的声学特性
2.
The possibility and the significance of replacing fibred absorption materials by fibreless materials,especially by microperforated panels,are discussed.
简要地介绍了吸声材料的基本特点，阐述了无纤维性吸声材料（特别是微穿孔板吸声结构）取代传统的纤维性吸声材料的可能性及其重要意义，较详细地介绍了近年来德国以及我国科研人员在无纤维吸声材料研究上所取得的进展。
3.
A calculating program of microperforated panel construction is worked out in this paper.
文中编制了微穿孔板结构的数值分析程序，通过计算实例，对微穿孔板结构的声学特性进行了探讨。
2) micro perforated panel
微穿孔板
1.
Based on theory about micro perforated panel,a micro perforated panel muffler was developed to meet the requirement of the pneumatic motor in roofbolter.
在微穿孔板消声理论的基础上 ,根据气动马达消声器的实际需要设计了一种微穿孔板消声器 ,并通过实验对这种消声器的消声特性和流阻进行了研究。
2.
In this paper, based on Maa's theory, the theory of micro perforated panel(MPP) absorber is summarized, a comparison between the calculated result and the testing result for intermediate and lower frequency standing wave tubes is made.
微穿孔板吸声结构具有吸声系数高、吸收频带宽等优点 ,广泛应用于噪声控制的各个领域 根据马大猷的微穿孔吸声理论 ,总结了微穿孔板吸声结构的吸声原理 ,并用基于此理论的计算结果与在低频、中频驻波管中实验的结果进行对比 ,得到了比较满意的结果 采用微穿孔板吸声结构 ,进行汽车发动机隔声降噪模拟实验 ,结果表明 ,微穿孔板吸声结构具有良好的降噪功能 微穿孔板吸声结构的吸声性能的初步研究 ,为微穿孔板吸声结构在工程中的应用提供了依
3) micro-perforated panel
微穿孔板
1.
Due to the excellent feature of micro-perforated panel structure in noise control,the micro-perforated panel structure has drawn much attention.
微穿孔板共振吸声结构在噪声控制上有着优异的表现,受到广大科研人员的关注。
2.
In order to solve this problem,the transfer matrix method is adopted to analysis of micro-perforated panel absorber\'s acoustic structure.
传统的声电类比法对双层微穿孔板吸声结构进行计算时,忽略了空腔声质量的影响,对于空腔距离比较短,频率比较低时是适用的,但是当空腔距离比较大或频率比较高时,则存在误差。
3.
Based on the accurate theory of the micro-perforated panel absorber,this paper presents one kind of approximate arithmetic for micro-perforated absorber with variational cavity.
基于马大猷教授提出的"微穿孔板吸声体精确理论",针对带变厚度空腔的微穿孔板吸声体,提出了一种理论近似算法。
4) microperforated-panel
微穿孔板
1.
On the basis of the general theory of microperforated-panel absorber, numeric analysis program is designed in structural design of microperforated-panel.
根据微穿孔板吸声体的准确理论,基于VC++6。
6) microperforated panel absorber
微穿孔吸声板
1.
One microperforated panel absorber is presented in this paper,which is used for replacing the old one.
提出一种穿孔吸声板,用于代替原有的吸声板,不仅可以减少材料的厚度,而且可以提高材料的吸声系数加宽吸声频带,以最大限度的提高经济指标,所研究的宽频变腔高阻吸声板经浙江省环保与振动控制专业协会测试,其吸声系数普遍高于普通微穿孔吸声板。
补充资料：成都无缝钢管厂管坯在菌式穿孔机上穿孔
成都无缝钢管厂管坯在菌式穿孔机上穿孔
成都无缝钢管厂管坯在菌式穿孔机上穿孔
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条