1) Masterbatch
母料
1.
Preparation of Polyamide 6 / montmorillonite Nanocomposites Via a Masterbatching Method and Its Properties;
母料法制备尼龙6/蒙脱土纳米复合材料及其性能
2.
Preparation of Nano-CaCO_3 Masterbatch and Its Effects on Mechanical Properties of PP;
纳米碳酸钙母料研制及对聚丙烯力学性能的影响
3.
Production Control of Polypropylene High Concentrated Masterbatch For Degradation;
聚丙烯高浓缩降解母料生产控制
2) master batch
母料
1.
Nano attapulgite master batch(NAMB)was prepared and it was used to toughen poly(ethyl terephthalate)(PET).
制备了纳米凹凸棒母料(NAMB),并将其与聚对苯二甲酸乙二酯(PET)共混,利用X射线衍射仪、扫描电子显微镜研究了PET/NAMB复合材料的微观结构,并测试了其力学性能。
2.
Carbon black(CB) was added into poly(ethylene terephthalate)/polyethylene(PET/PE) blend by discretely feeding technology and fiber grade PET/PE/CB conductive master batch with good combined properties was prepared in reciprocating pulsation extruder.
采用分离喂料技术在聚对苯二甲酸乙二酯(PET)/聚乙烯(PE)共混物中加入导电炭黑(CB),通过布斯往复式脉动挤出机熔融共混、挤出造粒,制备了综合性能较好的纤维级PET/PE/CB导电母料。
3) master-batch
母料
1.
Study on Anti-static Master-batch of Linear Low Density Polyethylene
线型低密度聚乙烯抗静电母料的研究
2.
With these analyse in considering,, a master-batch on a polyamide base is prepared through twin screw .
在此基础上，利用双螺杆挤出机制备了BOPA膜用尼龙母料，通过SEM，干烧实验，XRD等方法对加工母料进行了初步性能表征。
4) feed yeast
饲料酵母
1.
Study on the condition of feed yeast fermentation with sugar-cane molasses;
利用甘蔗糖蜜生产饲料酵母发酵条件的研究
2.
The feed yeast was produced by the ferment Geotrichum candidum AS 2.
研究了以红麻亚铵法制浆废液为原料生产饲料酵母的可行性。
3.
n order to resolve the problem that the rate of the raw materials utility is lower in the production of solid feed yeast,this experiment studies the saccharification technique of cultivating the raw materials of base starch.
为解决固体饲料酵母生产中原料利用率较低的问题，研究了培养基淀粉质原料的糖化处理工艺。
5) Masterbatch Way
母料法
1.
Study on Property of HDPE/POE/CaCO_3 Blown Films by Masterbatch Way;
母料法制备HDPE/POE/CaCO_3薄膜的性能研究
6) Toughening Master Batch
增韧母料
1.
Two kinds of E toughening master batch-E1-TMB and E2TMB were synthesized with HDPE as matrix resin,ethylene-propylene elastomer(M) and butadiene-styrene elastomer(N) as toughening agents,by adding appropriate amount initiator and anti-crosslinker.
以HDPE为基体树脂,乙丙弹性体(M)和丁苯弹性体(N)为增韧剂,加入适量引发剂、阻交联剂等,通过化学反应研制出2种聚乙烯增韧母料E1-TMB和E2-TMB,将2种增韧母料与HDPE热机械共混制得HDPE/E1-TMB和HDPE/E2-TMB共混物。
2.
Five kinds of polyethylene toughening master batches(E-TMB) of different elastomer content were preapred with high density polyethylene(HDPE) as matrix resin,ethylene/propylene copolymer and butadiene/styrene copolymer as toughening agents,and HDPE/E-TMB blends with elastomer content of 6.
以高密度聚乙烯(HDPE)为基体树脂,(乙烯/丙烯)共聚物和(苯乙烯/丁二烯)共聚物为增韧剂研制出5种弹性体含量不同的聚乙烯增韧母料(E-TMB),将E-TMB与HDPE热机械共混制得弹性体总含量均为6。
3.
The HDPE/E-TMB blends were prepared,which were made through thermal mechanical blending HDPE with the self-made E toughening master batch(E-TMB).
用自制增韧母料(E-TM B)与HDPE热机械共混制得HDPE/E-TM B共混物。
补充资料：母料
分子式：
CAS号：
性质：增强塑料内被纤维或其他增强材料分散于其中的树脂组分或基料。复合材料中的连续相，称母料或基料。
CAS号：
性质：增强塑料内被纤维或其他增强材料分散于其中的树脂组分或基料。复合材料中的连续相，称母料或基料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条