1) spin-coating technology
旋涂技术
1.
Nanometer scale TiO_2 films are prepared on glass substrates with film thickness less than 100nm by sol-gel process combining with spin-coating technology.
采用溶胶-凝胶法,利用旋涂技术在玻璃表面制备了膜厚小于100nm的纳米TiO_2薄膜,以去离子水和苯作为水和油模型,利用XRD、AFM系统研究了煅烧温度、粒径及膜厚对薄膜双亲性的影响。
2.
Nanometer scale TiO2 film was prepared on glass substrate with film thickness less than 100 nm,crystal size in the range of 10~30 nm by sol-gel process combining with spin-coating technology.
以玻璃为基底,采用溶胶-凝胶法,利用旋涂技术在玻璃表面制备了膜厚小于100 nm,粒径在10~30 nm之间的纳米TiO2薄膜;利用XRD,AFM系统研究了煅烧温度及膜厚对薄膜亲水性的影响。
2) spin coating technique
旋转涂覆技术
1.
c-axis orientation zinc oxide thin films on glass substrates were prepared by sol-gel spin coating technique,which were characterized by DSC/TGA,X-ray diffraction and SEM.
采用sol-gel法,在普通载玻片上使用旋转涂覆技术生长了具有c轴择优取向生长的ZnO薄膜。
2.
Zinc oxide thin films with c-axis orientation on glass and Si(111) substrates were prepared by Sol-gel spin coating technique,which were characterized by DSC/TGA,X-ray diffraction and SEM.
采用Sol-gel法,在普通载玻片上使用旋转涂覆技术生长了具有c轴择优取向生长的ZnO薄膜。
3) coating technology
涂层技术
1.
Based on this,the applications adopting new materials dry cutting tools,coating technology and new-type structure tools are discussed at length.
从干式切削技术的绿色特性出发,简要介绍了干式切削刀具的新材料、涂层技术和刀具设计技术,在此基础上,较详细地讨论了采用新材料的干式切削刀具、涂层刀具和新型结构刀具三大方面的应用情况,最后对干式切削刀具技术的发展和应用情况进行了展望。
2.
In addition,the constant progressive requirements for cutting machining and the level of the materials machined and also reducing the environmental pollution and so on have promoted the development of coating technology for modern cutting tools.
近几年来,在经济全球化背景下,我国的制造业获得了空前发展的机遇,而现代切削刀具成了提升制造业技术水平的关键因素之一,不断提高的切削加工要求和被加工材料的能级以及减少切削加工对环境污染等有力地推动了用于现代切削刀具涂层技术的发展。
3.
The development of coating technology of cemented carbides is summarized.
本文主要综述了硬质合金刀具涂层技术的发展,对硬质合金涂层技术的概念、分类和改进措施等进行了阐述。
4) coating technique
涂装技术
1.
It comprehensively expounded the advance in the research of the polymer powder coating and coating technique, the adhesion between coating and base metal, the coating bond strength and the coating interfacial mechanics, etc.
综述了高性能聚合物粉末涂料及其金属表面涂装技术、涂层与金属基体的结合强度、涂层界面力学等方面的研究进展。
5) spraying technology
喷涂技术
1.
The paper introduces various spraying process, spraying technology, relative parameters, definition of transfer efficiency of coatings and the ways to increase it, and the development trend thereof.
本文介绍了各种喷涂方法、喷涂技术、相关参数、涂着效率的定义、提高涂着效率的途径及其发展动向。
2.
The paper introduces the experience that the spraying technology mend the fray of generator rotor, cure the leak of genertor return box.
介绍了喷涂技术在修复发电机转轴磨损、根治转子回水箱漏水方面的经
6) finishing technology
涂饰技术
1.
Transfer-coating finishing is a new finishing technology which refered to the technique of thearitical leather cover.
羊革的涂饰技术多种多样,其中移膜涂饰是借鉴合成革的人工造面技术而发展起来的一种新型的涂饰技术。
补充资料：旋涂
分子式：
CAS号：
性质：电子工业中，基片垂直于自身表面的轴旋转，同时把液态涂覆材料涂覆在基片上的工艺。
CAS号：
性质：电子工业中，基片垂直于自身表面的轴旋转，同时把液态涂覆材料涂覆在基片上的工艺。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条