1) Nickel foam
泡沫镍
1.
Effects of different conductive treatments on the performances of continuous nickel foam;
导电化方法对连续泡沫镍性能的影响
2.
Technologies and parameters of nickel foam;
泡沫镍的制备工艺及性能参数
2) foam nickel
泡沫镍
1.
Optimal film thickness of TiO_2 coated on foam nickels for the photocatalytic degradation of formaldehyde;
负载TiO_2的泡沫镍网光催化降解甲醛的膜厚优化
2.
Catalytic hydrodechlorination of 4-chlorophenol in aqueous solution by a palladized foam nickel catalyst
钯/泡沫镍对水体中4-氯酚的氢解脱氯研究
3.
Anatase TiO2 and TiO2/Al2O3 films were successfully prepared on foam nickel substrates by sol-gel technique.
以泡沫镍为载体,Al2O3作为过渡中间层,用溶胶-凝胶法在泡沫镍上负载锐钛矿相的TiO2薄膜,制成泡沫金属基的TiO2和TiO2／Al2O3光催化剂,利用XRD和FE-SEM等测试手段对其性质进行表征,用乙醛气体的光催化降解测试其活性。
3) Foamed nickel
泡沫镍
1.
Electrocatalytic hydrogenation of 6-amino-5-nitroso-1,3-dimethyluracil on foamed nickel cathodes;
1,3-二甲基-5-亚硝基-6-氨基脲嘧啶泡沫镍阴极电催化加氢研究
2.
Effect of sulfur content in nickel coating on foamed nickel performances and effect of electroplating parameters on sulfur content in the nickel coating in foamed nickel production were studied.
研究了泡沫镍生产中镀层硫含量对泡沫镍性能的影响以及电镀工艺参数对镀层硫含量的影响。
3.
Introduces the design and features of the coiling system we developed for the foamed nickel sponge.
海绵卷绕系统是真空法连续镀制泡沫镍成套设备的重要组成部分之一,本文主要介绍了海绵卷绕系统的设计及其特点。
4) porous nickel
泡沫镍
1.
The porous strontium doping,strontium and fluorin doping photocatalytic materials with porous nickels as the carriers were prepared by hydrothermal method.
以多孔泡沫镍为载体,采用水热合成法制备了Sr改性和Sr、F共掺杂改性多孔光催化材料,采用XRD、TEM、SEM、FT-IR、UV-vis、XPS对样品进行了表征,并以样品对水中罗丹明B的降解性能为评价指标,对样品的光催化性能进行了评价。
2.
Porous titanium dioxide-based photocatalytic materials with porous nickel as carrier were prepared by electroless composite plating method.
以多孔泡沫镍为载体,采用化学复合镀法制备了性能优良的多孔光催化材料,以产品对水中罗丹明B的降解性能为评价指标,对产品的光催化性能进行评价。
3.
With one 10 W ultraviolet sterilized lamp,and by using titanium dioxide as catalysis, which is immobilized on porous nickels, an investigation of the photocatalytic degradation of the organic pollutants with low boiling point had been studied.
以10W直管紫外杀菌灯为光源,以泡沫镍基纳米TiO2为催化剂,研究了低沸点有机小分子污染物的光催化降解。
5) Foamed Ni
泡沫镍
1.
Fabrication of Sound-Absorbing Material-Foamed Ni by Electroplating Technique;
电镀法制备泡沫镍吸声材料
2.
The paper describes the production design of foamed Ni,with discussion for product s quality improvement.
介绍了连续生产带状泡沫镍的工艺设计实例 ,讨论了改进泡沫镍产品性能的方法。
6) porous nickel mesh
泡沫镍板
1.
Three different metal ions doped TiO_2 photocatalysts,which were prepared by the sol-gel method,were immobilized to porous nickel mesh by coating.
采用溶胶-凝胶法制备了3种掺杂金属离子的纳米TiO2光催化剂,并将其负载于泡沫镍板上,以室内空气典型污染物甲醛和VOCs为模型反应物,研究了对甲醛和VOCs气体的光催化作用并讨论了La3+的最佳掺杂比例以及环境因素对光催化效率的影响。
补充资料：泡沫镍
分子式：
CAS号：
性质：碱性蓄电池极板常采用的一种多孔镍基板（plaque）。由多孔泡沫塑料片化学镀镍后烧去塑料芯制成。其优点是孔率大，能填充较多活性物质；缺点是电阻率较高，不宜大电流放电。
CAS号：
性质：碱性蓄电池极板常采用的一种多孔镍基板（plaque）。由多孔泡沫塑料片化学镀镍后烧去塑料芯制成。其优点是孔率大，能填充较多活性物质；缺点是电阻率较高，不宜大电流放电。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条