1) ECAP
等径弯曲通道变形
1.
The influence of Equal Channel Angular Pressing(ECAP) deformation on the microstructure and magnetic properties of a semi-magnetic alloy,2J4,was studied.
研究了等径弯曲通道变形(ECAP)对2J4合金显微组织和磁性能的影响。
2.
3 μm after fourth pass and the grain size does not decrease further after 4 pass of ECAP.
研究了室温下C方式等径弯曲通道变形(ECAP)对超低碳钢组织及性能的影响。
3.
Equal Channel Angular Pressing(ECAP) is a new processing procedure fabricating ultrafine grain material,whose basic principle is that sample is embedded into the bending passage which has the same cross-section shape.
等径弯曲通道变形(ECAP)是制备超细晶材料的新工艺,其基本原理是将试样放入横截面形状完全相同、并成一定角度的弯曲通道中,试样在压力作用下通过通道时,在通道弯曲处产生一定量均匀的纯剪切变形,最终获得很高的变形量,使材料组织发生明显细化。
2) equal channel angular pressing
等径弯曲通道变形
1.
The deformation behavior of 65 Mn steel by equal channel angular pressing(ECAP) was investigated at 650 ℃ with route C in which the sample was rotated 180° along its longitudinal axis.
在650℃下对65Mn钢进行了C方式的等径弯曲通道变形(Equal Channel AngularPressing,简称ECAP)研究。
2.
Numerical simulation and microstructure analysis to an equal channel angular pressing (ECAP) of low-carbon steel were conducted, and the effective strain distribution and the pattern of pressing load were obtained via the numerical simulation.
对低碳钢等径弯曲通道变形进行了数值模拟,并分析了它的显微组织。
3) equal channel angular processing
等径弯曲通道变形
1.
Steel and other iron-based alloys can have ultrafine grains and improved properties by equal channel angular processing(ECAP).
钢和铁基合金通过等径弯曲通道变形(ECAP)可获得超细晶组织,从而改善材料的性能。
2.
Equal Channel Angular Processing is an effective method to process ultra-fine materials, by which various kinds of ultra-fine metal materials are done successfully.
等径弯曲通道变形(Equal Channel Angular Processing简称ECAP)是一种制备超细晶材料的有效方法，现已成功开发了多种超细晶金属材料。
3.
Equal Channel Angular Processing of the pearlitic steel (0.
近年来，强烈塑性变形特别是钢和铁基合金的等径弯曲通道变形因为具有获得超细晶组织和改善性能的潜力，引起了各国研究人员的很大兴趣。
4) equal-channel angular pressing
等径弯曲通道变形
1.
Ultrafine-grained aluminum-based alloy was fabricated via equal-channel angular pressing (ECAP) and microstructural evolution at different passes of ECAP was researched.
用等径弯曲通道变形(ECAP)的方法制备出超细晶铝合金材料,并研究了在不同道次条件下其显微组织的演化过程。
2.
Microstructure and grain refinement limit of 7475 aluminum alloy after equal-channel angular pressing;
将等径弯曲通道变形应用于7475铝合金,等效真应变达12。
5) equal channel angular pressing(ECAP)
等径弯曲通道变形
1.
The equal channel angular pressing(ECAP) of 2J4 alloy was studied at room temperature with route A in which the sample was not rotated after pressing one pass and entered directly the next pass.
借助光学显微镜和透射电镜对2 J4合金等径弯曲通道变形(ECAP)组织进行了研究。
6) equal-channel angular pressing(ECAP)
等径弯曲通道变形(ECAP)
补充资料：胎圈变形、弯钢圈、钢圈变形、口弯等
分子式：
CAS号：
性质：又称胎圈变形、弯钢圈、钢圈变形、口弯等。指轮胎胎圈表面局部高低不平的现象。 胎圈底部 bead base 又称胎圈基部。指轮胎与轮辋胎圈座接触的部位。其作用是保持胎圈与轮辋底部相着合。
CAS号：
性质：又称胎圈变形、弯钢圈、钢圈变形、口弯等。指轮胎胎圈表面局部高低不平的现象。 胎圈底部 bead base 又称胎圈基部。指轮胎与轮辋胎圈座接触的部位。其作用是保持胎圈与轮辋底部相着合。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条