1) ribbed bar
带肋钢筋
1.
Resolution of the ribbed bar stacking in reducing sizing mill zone of high-speed wire rod rolling line;
高线减定径区带肋钢筋堆钢问题的解决
2.
Development of the ribbed bar according to ASTMA615M-96a;
美标带肋钢筋的试制与开发
3.
This paper introduces the creating of high benefits from hot-rolled ribbed bar with less competition,relying on management and scientific and technical progress.
介绍了竞争力较差的热轧带肋钢筋如何依靠管理和科技进步创造高效益。
2) reinforced bar
带肋钢筋
1.
Introduction of production reinforced bar by high-speed wire mill;
高线轧机生产带肋钢筋盘卷介绍
2.
With statistic method the quality feature values of chemical composition and mechanical properties of HRB400 reinforced bar are analyzed,its fatigue,welding,mechanical linking and sticking properties are checking analyzed.
运用统计方法对邯钢HRB400带肋钢筋的化学成分、力学性能等质量特性值进行了分析,并对其疲劳性能、焊接性能、机械连接性能、粘结性能等进行了检验分析。
3.
The reason of occurrence of calabash like head on large size hot rolled reinforced bar and the method to resolve it are discussed.
探讨了大规格热轧带肋钢筋头部葫芦状的产生的原因及解决的措施。
3) ribbed steel bar
带肋钢筋
1.
Discuss rolling with minus tolerance for ribbed steel bar;
浅谈带肋钢筋负偏差轧制
2.
Insight about weigh tolerace in ribbed steel bar is introduced, different ineasurements about it are analysised, implementation of standard GB 1499-1998 is researched, connection of weigh tolerace with size to lerace or quality test is discussed, on the basis of this we planed 3 tables for yield test, summarized experience of subzero tolerace roll.
对带肋钢筋重量偏差的理解 ,分析重量偏差不同的测量方法 ,研究其标准GB 1 499- 1 998实施方法 ,讨论重量偏差与尺寸偏差和质量判定的关系 ,设计提供生产检验的三种表格 ,总结负偏差轧制的经验。
3.
The application of non weld connecting technique for ribbed steel bars with Model GS A 32 connector in construction of Longtouqiao reservoir was introduced.
介绍了GS—A—32带肋钢筋挤压连接机在龙头桥水库施工中的应
4) ribbed steel bars
带肋钢筋
1.
Factors of influencing the pressed sleeve splicingquality of ribbed steel bars;
带肋钢筋套筒挤压连接质量的因素及控制方法
2.
The main reason of the welding brittle fracture for 20MnSi ribbed steel bars is owing to high carbon equivalent and unusual metallurgical structure,the method of the control the carbon equivalent and finishing temperature is put forward through the simulation tests,examination and statistical analysis according to the brittle fracture phenomenon of the welded 20MnSi reinforced bar.
针对20MnS i热轧带肋钢筋焊接异常断裂现象,进行模拟焊接及拉伸试验,通过对钢筋的理化测试及试验结果统计分析发现碳当量偏高、金相组织异常是造成带肋钢筋焊接拉伸脆断的主要原因,并提出控制碳当量上限、控制终轧温度等措施。
5) rebar
[ri'bɑ:]
带肋钢筋
1.
A Study on Strengthening Mechanism of Vanadium Microalloyed Hot Rolled Rebar;
钒微合金化在热轧带肋钢筋中的强化机理研究
2.
The longitudinal extension distributed in the rebar has been studied.
实验研究了延伸变形在带肋钢筋中的分布。
6) ribbed bars
带肋钢筋
1.
In the paper,it is introduced the whole process of developing HRB400 hot rolled ribbed bars and the results of trial production.
文中介绍了HRB400热轧带肋钢筋的整个开发过程,给出了试制结果。
2.
Firstly,the fatigue bond strength between ribbed bars and concrete were calculated according to the offshore concrete structures standard(DNV-OS-C502) by DNV(DET NORSKE VERITAS) in Norway.
借鉴挪威DNV公司离岸混凝土结构设计标准(DNV-OS-C502)中的有关规定,计算了带肋钢筋与混凝土之间的疲劳黏结强度,得出了不发生黏结疲劳破坏时的钢筋允许疲劳应力幅[Δsσ]。
补充资料：板带轧制速度规程(见板带轧制规程设计)
板带轧制速度规程(见板带轧制规程设计)
speed schedule for plate and strip rolling
bandai zhazhi sudu guieheng板带轧制速度规程(speed seheduxe fo:plateand strip rolling)见板带札制规程设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条