1) isobaric spray & blow
等压喷吹
1.
Effective control on isobaric spray & blowtorch and airflow spray distance of pulsed bag-hose precipitator means a key technology in ensuring the result of dust removal and the effective measures for electricity saving and energy conservation,prolonging the use of filter bag.
对脉冲袋式除尘器的等压喷吹管和气流喷射距离的有效控制,是保证清灰效果的关键技术,是节电节能、延长滤袋使用寿命的有效措施。
2) jetting pressure
喷吹压力
1.
It was found that with the increase of the jetting pressure,the pressure peak can.
结果表明,喷吹压力对正压力峰值及到达该峰值的时间这两个指标的影响较大,提高喷吹压力能够很好地改善脉冲喷吹滤筒除尘器的清灰性能,但脉冲宽度的增加对这两个指标的影响不明显。
3) injection
[英][ɪn'dʒekʃn] [美][ɪn'dʒɛkʃən]
喷吹
1.
Research progress in waste plastics injection in blast furnace;
高炉喷吹塑料废弃物技术研究进展
2.
Study on the feasibility of injection of waste plastic in our country blast furnace;
我国高炉喷吹废塑料的可行性研究
3.
Mathematical Model of Oxygen Blast Furnace with Preheating Gas Injection into Upper Shaft;
从炉身喷吹预热气体时氧气高炉内冶炼过程的数学模型
4) injecting
[英][in'dʒekt] [美][ɪn'dʒɛkt]
喷吹
1.
The optimal means of eliminating white pollution — the current status and trend of injecting waste plastics into the blast furnace;
消除“白色污染”的最佳途径——高炉喷吹废塑料的现状及其必然趋势
2.
Since the method of injecting waste plastics into Blast Furnace was developed by German at beginning of 1990s, it was considered as optimum approach to solve the problem of waste plastics.
高炉喷吹废塑料是 2 0世纪 90年代初由德国提出的处理废塑料的最佳方法。
3.
This article concludes the test result and production experience of the internal puddler aboutinjecting the bituminous and anthracite mixed coal.
本文归纳了国内炼铁工作者关于高炉喷吹烟无混合煤的试验结果和生产经验。
5) puffback
逆喷吹，反吹
6) low pressure plasma spray
低压等离子喷涂
1.
8% Y_2O_3-ZrO_2(YSZ) coatings were deposited via low pressure plasma spraying(LPPS) under different chamber pressure and characterized by SEM,XRD and XPS.
采用YSZ(Y2O3-ZrO28%W)粉末,经低压等离子喷涂(LPPS)在不同压力条件下制备了YSZ热障涂层(TBCs)。
2.
Titanium coatings have been deposited onto 317L stainless steel plate by low pressure plasma spray(LPPS)process.
采用低压等离子喷涂工艺，在３１７Ｌ不锈钢质接骨板上喷涂了钛涂层，制备出钛涂层的接骨板。
3.
In this paper, the NiCoCrAlYTa coating was sprayed on the substrate of the single crystal superalloy by low pressure plasma spray technique, and then the sprayed coating was vacuum heat treated.
本文采用低压等离子喷涂技术(LPPS)在单晶高温合金上制备了NiCoCrAlYTa六元合金涂层。
补充资料：等压热容
分子式：
CAS号：
性质：系统在恒定的外压下温度升高1K所需的热，符号Cp。此时系统吸取的热除增加其内能以外还要补偿对抗恒定外压所做的功。因为在等压过程中系统吸热Qp=△H(不做除体积功外的其他功)，因此Cp就是系统升温1K时的焓变。用数学式表示则为其中表示偏微分，脚注p表示压力恒定。由于等容热容Cv是在体积不能改变下的热容，因此Cp的值大于Cv。对于理想气体，Cp-Cv=nR，n为气体的量(mol)，R为气体常数。
CAS号：
性质：系统在恒定的外压下温度升高1K所需的热，符号Cp。此时系统吸取的热除增加其内能以外还要补偿对抗恒定外压所做的功。因为在等压过程中系统吸热Qp=△H(不做除体积功外的其他功)，因此Cp就是系统升温1K时的焓变。用数学式表示则为其中表示偏微分，脚注p表示压力恒定。由于等容热容Cv是在体积不能改变下的热容，因此Cp的值大于Cv。对于理想气体，Cp-Cv=nR，n为气体的量(mol)，R为气体常数。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条