说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 物理力学特性
1)  physical and mechanical characteristics
物理力学特性
1.
On the microscopic analysis base,it is researched by experiment on the physical and mechanical characteristics of paste-like binging material.
在微观分析的基础上,对似膏体充填用胶凝材料的物理力学特性进行了试验研究。
2)  physical and mechanical property
物理力学特性
1.
Whether the high ground temperature can cause the rock s physical and mechanical propertys change, and influence underground powerhouse s surrounding rock stability.
高地温是否会导致岩体物理力学特性变化,进而影响地下厂房围岩稳定性,本文就这方面问题——地温异常地区的温度工程效应进行了初步的研究,并取得了一定的成果。
2.
On this basis, the physical and mechanical property of HPC is fully studied by the means of orthogonal experiment, including workability, compression strength, spit tensile strength, frac.
本文首先分析了配制高性能混凝土的原材料技术要求,采用正交设计方法,全面系统研究了高性能混凝土的工作性、抗压强度、劈裂抗拉强度、断裂性能、耐久性及变形等物理力学特性;通过数理分析方法,系统研究了水胶比、粉煤灰掺量和砂率等配合比参数对高性能混凝土主要物理力学性质的影响。
3)  physico-mechanical properties
物理力学特性
1.
The high-level radioactive waste disposal structure is based on the physico-mechanical properties of rock mass and expansive soil.
高放废物处置研究是非常重要和必要的,其处置形式的选择是处置安全的重要因素之一,相应处置结构的物理力学特性研究是决定高放废物处置形式的重要依据。
4)  physical and mechanical properties
物理力学特性
1.
It is important for us to study the physical and mechanical properties, characteristics of strength and deformation of the red clay so as to help the construction of roads and r.
因此,研究红粘土的物理力学特性、强度特性以及变形特性,对今后红粘土地区的铁路公路建设、路基病害防治处理、边坡工程设计等具有重要意义。
5)  physico-mechanical characteristics
物理力学特性
1.
Study on physico-mechanical characteristics of phosphogypsum;
磷石膏物理力学特性初探
6)  basic physical mechanics properties
基本物理力学特性
1.
Some thematic engineering geological researches have been conducted in the north, middle and south section of the desert, through which the basic physical mechanics properties of the sand, such as compactibility, compressibility, permeability, frost and heave, .
通过在沙漠北部、中部和南部试验段进行的专题工程地质研究,介绍了新疆准噶尔盆地古尔班通古特沙漠风积砂的基本物理力学特性和压实性、压缩性、渗透性、冻胀性等工程地质特性。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条