1) separator
[英]['sepəreɪtə(r)] [美]['sɛpə'retɚ]
隔板
1.
Studies on microstructure of UHMWPE separators;
超高分子量聚乙烯隔板微观结构的研究
2.
Discussion on penetration mechanism of separators for lead-acid batteries;
铅酸蓄电池隔板渗透问题的研讨
3.
Application of separators in valve-regulated lead acid batteries;
隔板在阀控式密封铅酸蓄电池中的应用
2) Diaphragm
[英]['daɪəfræm] [美]['daɪə'fræm]
隔板
1.
The Casting Technique for the Forth Degree Diaphragm of the Single-sucking 24 WM Steam Turbine;
单抽24 WM汽轮机第四级隔板的铸造
2.
Test and research on adding axial air space diaphragm to 200MW turbine generator;
200MW汽轮发电机加装轴向气隙隔板的试验研究
3.
Power plant on site measurement,of diaphragm deflcetions of large turbines,provides a way for evaluating the stiffness of diaphrams and therewith their safety in operation.
在电厂现场对大功率汽轮机隔板挠度进行测量,可以为隔板刚度状态检测和安全性评定提供技术手段。
3) clapboard
[英]['klæpbɔ:d] [美]['klæbɚd]
隔板
1.
Welding clapboard's inspection and reinforce on turbine machine 200MW;
200MW汽轮机焊接隔板检查与加固技术
2.
A preliminary experimental study of cracking ring with a clapboard;
加隔板开裂环的试验研究
3.
This paper presents the key working procedure of box column making--technique for processing and assembling of the clapboard.
箱型柱制作质量是箱型柱质量的关键,介绍了箱型柱制作的关键工序——隔板的加工组装工艺。
4) baffle
[英]['bæfl] [美]['bæfḷ]
隔板
1.
Analysis and repair welding for baffle cracks on feedpump-driving steam turbine in Zhanjiang Power Plant;
湛江发电厂给水泵汽轮机隔板裂纹的分析及焊接修复
2.
By analyzing the structure,technologic process and damaged status of heat exchanger used in gas purifying unit,combining with the existing conditions of gas-hydrate,it is pointed out that the freeze-blockage caused by gas-hydrate results in the distortion and crack of tube-case baffle of U-tube heat exchanger.
通过分析天然气净化装置中换热器的工艺流程、结构以及换热器的损坏情况,结合天然气水合物的形成条件,指出天然气水合物引起的冻堵是净化装置中U形管换热器管箱隔板变形、断裂的原因,并由此提出了防止其管箱隔板损坏的方法和措施。
3.
The bottom of LPG fractionator is separated into two spaces by baffle.
气体分馏装置的脱乙烷塔底设有隔板,将塔釜分为两个空间。
5) Partition
[英][pɑ:'tɪʃn] [美][pɑr'tɪʃən]
隔板
1.
The column-supported with partition board reinforced concrete silo as a result of its special structural style,has the very big difference with the ordinary round silo in the stress aspect.
柱承式带隔板钢筋混凝土筒仓由于其特殊的结构形式,与普通圆筒仓在受力方面有很大的不同,圆筒仓设置隔板后,隔板与筒壁固接,其受力发生了根本变化,由原来的3次超静定结构变为6次超静定结构。
2.
To reveal the seismic mechanism of reinforced concrete(RC) split column on the basis of previous model experiments,the seismic behavior of the RC split column is numerically simulated,considering the nonlinear contact between partitions and elemental columns and the bond-slip between bars and concrete.
为揭示钢筋混凝土分体柱的抗震机理,在以前模型试验基础上,考虑隔板与单元柱之间的非线性接触及钢筋与混凝土之间的黏结滑移,数值模拟了钢筋混凝土分体柱的抗震性能。
3.
transformed blades o f the final -four -stage vane wheels an d partitions of the final -eight -sta ge ofthe turbine.
马钢股份公司热电厂实施了以更改汽轮机末四级叶轮叶片及末八级隔板为主要内容的增容改造,充分挖掘了设备潜力,并使机组的安全性有所增强,热效率得到提高,获得了良好的经济效益。
6) partition board
隔板
1.
Without destroying, aluminum alloy type of 200 partition boards which has been machined but not brazed were judged by analyzing the physical and mechanical difference between 2A12 and 3A21 aluminum alloy.
本文通过对失效件进行化学成分分析、显微硬度测试,确定了2A12铝合金板材误用作3A21铝合金板材导致了天线组合钎焊的熔化变形;通过分析2A12铝合金和3A21铝合金的物理性能、力学性能的差别,在未损伤零件的情况下,鉴定了生产现场未钎焊的200件隔板是否存在混料现象。
2.
This article introduces the application of the laser fusion cast complex technology on the steam turbine rotor and the partition board,of the Thermal Power Plant s 1st air blower,is working more stably,reliably and economically.
介绍了激光熔铸复形技术在热电厂1#风机汽轮机转子及隔板上的应用,应用后机组运行更加稳定、可靠、经济。
补充资料：隔板
隔板 明清家具部件名称。框体内分隔左、右空间的板材。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条