说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 罐底
1)  tank bottom
罐底
1.
Establishing the mathematics model of tank bottom corrode disfigurement throughout themagnetic leakage theory;
罐底板表面缺陷漏磁场数学模型建立
2.
The construction of the large oil tank bottom and the control of welding deformation;
大型油罐罐底施工及焊接变形的控制
3.
The acoustic emission(AE) inspection and location principle of large vertical normal pressure storage tank bottom on-line inspection was studied.
基于大型常压立式金属储罐底板在线声发射检测及定位的原理,针对声发射检测过程中因声源性质不明确导致的罐底完整性评价结果不准确的问题,采用小波分析方法对罐底声发射信号进行了分解。
2)  oil tank bottom plate
油罐罐底
3)  End Pieces
罐盖和罐底
4)  tank floor
储罐底板
1.
Defects inspection system for tank floors based on virtual instrument technique;
基于虚拟仪器技术的储罐底板缺陷检测器
2.
According to the current problems existing in the magnetic flux leakage testing for tank floor,a mobile robot was developed which could take the place of manual or power-driven approach to tank floor MFL inspection.
针对目前储罐底板漏磁检测中存在的问题,提出研制移动机器人代替人力驱动或人工辅助电力驱动方式进行储罐底板漏磁扫描检测。
3.
In order to improve the efficiency of magnetic flux leakage(MFL) testing for tank floors,the flaw location,test data description and visualization from anomalistic signals are studied.
针对储罐底板漏磁检测的实际需要,研究了根据异常数据点进行缺陷自动定位、定量描述及可视化的基本方法。
5)  oil-water sludge
罐底油
1.
The separation process of oil-water sludge in centrifugal field was analyzed,and the expression of sedimentation height and float height for dispersed phase and centripetal substance were deduced by dynamic equation and granularity distribution function.
为了定量描述油渣水在离心力场中的分离过程,以含油渣水三相的罐底油为研究对象,对其中的分散相与向心层物质,运用动力学方程和粒度分布函数推导出其沉降高度和上浮高度的理论表达式,并通过实验对其进行验证,从而为工业用三相分离提供一个理论参考依据。
2.
The current situation of oil-water sludge,the movement rule of and the forces on the solid impurity particles,oil drops and water of the oil-water sludge in centrifugal force field were introduced,and relevant physical models were established.
介绍了罐底油的现状及罐底油中渣颗粒和油滴及水在离心力场中的运动规律、受力情况,建立了相应的物理模型;推导出了渣颗粒的离心沉降分离速度、沉降层厚度和油滴的向心分离速度、向心层厚度的表达式;通过小型实验设备对罐底油进行了三相分离实验研究,分析了温度、分离转数等对分离效果的影响。
3.
Oil-water sludge had the characteristics of good emulsification oil-water,strong adhesion of oily sludge and small relative gravity in oil-water sludge which was difficult to directly separate crude oil from oil-water sludge.
罐底油具有油水乳化严重、油渣相互附着力强、渣颗粒相对比重小等特点,直接进行油水渣三相分离获得原油非常困难。
6)  tank with oblique bottom
斜底储罐
1.
Combined with the installation practice in Jilin fuel ethanol project,the construction methods of tank with oblique bottom and winder are separately discu ssed.
结合吉林燃料乙醇工程中斜底储罐和盘梯的安装实践,分别介绍了斜底储罐和盘梯的施工方法。
补充资料:罐底
1.亦作"罆底"。 2.一种瓷质套料鼻烟壶。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条