1) residual oil
残余油
1.
Influence of viscoelasticity and interfacial tension of non-alkali binary compound solution on recovery efficiency of residual oil after water flooding;
无碱二元体系的黏弹性和界面张力对水驱残余油的作用
2.
Effect of polymer/amphoteric surfactant compound system on residual oil after water flooding in ultralow interfacial tension;
无碱超低界面张力下二元复合体系对水驱残余油采收率的影响
3.
Enhanced residual oil recovery by using polymer/betaine surfactant system after water flooding;
聚合物/甜菜碱表面活性剂提高水驱后残余油采收率研究
2) irreducible oil
残余油
1.
the results show that the foam multisystem can increase the area of macro-sweep area、amplify micro-swept volume, And shows a better effect of displacement to various types of irreducible oil, thereby improve the oil displacement efficiency.
其次,分析研究了泡沫复合体系的驱油机理以及对各类水驱后残余油的驱替机理及驱替效果,结果表明:泡沫复合体系能够增加宏观扫油面积、扩大微观波及体积,并对各类残余油均表现了较好的驱替效果,从而提高了驱油效率。
2.
The water-oil two-phase fluid flow was studied using the technique of nuclear magnetic resonance,to obtain the distribution of irreducible water,irreducible oil and produced oil in cores of different porosity during drainage and imbibition,and to reveal the formation mechanism and imbibition mechanism quantitatively during the water displacement.
本研究利用真实岩芯,以去氢煤油为模拟油,利用核磁共振技术,研究了油水两相渗流规律,揭示了排驱和吸入过程的束缚水、残余油和采出油在不同孔隙中的分布,讨论了其形成机制,定量研究了驱替过程中渗吸作用的程度。
3) residual oil pools
残余油藏
1.
Identifying residual oil pools and reconstructing hydrocarbon charge history by a quantitative fluorescence techniques along Panyu low uplift-north slope in Baiyun sag;
应用定量荧光技术判识番禺低隆起—白云凹陷北坡残余油藏并重构烃类充注史
4) residual oil film
残余油膜
1.
Efffect of viscoelastisity of HPAM solution on residual oil film;
聚合物溶液的黏弹性对残余油膜的作用
2.
In connection with residual oil film of different forms after water flooding on the oleophilic rock and the viscoelasticity character of the polymer solution,the Upper-Convected Maxwell constructive equation of viscoelastic fluids was choosed,the model was analysized numerically by using computation fluid software-Polyflow.
针对亲油岩石水驱后残余油膜的存在形式及聚合物溶液的粘弹特性,选取粘弹性流体中的上随体Maxwell本构方程并使用计算流体软件Polyflow对模型进行数值分析。
5) residual ink
残余油墨
1.
What Caused the poor bleachability of DIP fines? the two factors coming from external contamination were: residual ink and transition metals in pulp,specifically iron.
什么使得脱墨浆细料的漂白反应性能差?是来自内部杂质的两个因素:残余油墨和过渡金属,特别是铁。
2.
Through analyzing particle number and particle size of residual ink as well as brightness, the effects of solvent pretreatment on deinking process for mixed office paper were evaluated, meanwhile, deinking process was optimized.
采用一种新的脱墨工艺———溶剂预处理 ,针对混合办公废纸中最难处理的静电复印纸和激光打印纸进行脱墨研究 ,通过分析残余油墨尘埃粒子的数目、粒径 ,以及二次纤维的光学性能 ,评价了溶剂预处理对脱墨效果的影响 ,并对工艺条件与流程进行优化。
6) residual tar,residue tar
残余焦油
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条